Login       My Wishlist
  My Cart
$0.00 / 0 items
 
3D Printing Supplies Outlet
3D Printers & Essential Supplies
 
International Access
Global Shipping Options Available
Home About Us News Our Blog Our Catalog My Cart My Account Track Shippment Contact Us
  Our Catalog

Gulfcoast Robotics - Huge Savings! Save up to 18%


Huge Savings! Up to 18% off on Gulfcoast Robotics products at 3D Printing Supplies Outlet. Hurry! Limited time offers. Offers valid only while supplies last.



[Gulfcoast Robotics] Round Borosilicate Glass Print Surface D=200mm for RepRap 3D Printer Kossel Delta.
[Gulfcoast Robotics] Round Borosilicate Glass Print Surface D=200mm for RepRap 3D Printer Kossel Delta.
In Stock
$16.99

mpn: BGR200, ean: 0719104610069,

Borosilicate Glass print bed for Reprap Delta Robot 3D printer such as Kossel and variations. Diameter is 200mm, thickness 3mm. The material has excellent thermal and chemical properties compared to soda lime glass. Resists cracking due to direct hig...


[Gulfcoast Robotics] Geared Extruder for V6 Metal Hotend with Direct or Bowden Feed.
[Gulfcoast Robotics] Geared Extruder for V6 Metal Hotend with Direct or Bowden Feed.
In Stock
$39.99

mpn: EXTITAN, ean: 0719104610526,

This is a close replica of popular 3D Printer extruder. Our kit has all necessary parts to run this extruder as direct feed extruder, or as a bowden feed extruder. You can use lightweight "pancake" motor from our store. We also have hotend compatible...


[Gulfcoast Robotics] 1.75mm Filament All Metal Bowden Extruder Upgrade for RepRap 3D printer Prusa i3 or Mini Kossel.
[Gulfcoast Robotics] 1.75mm Filament All Metal Bowden Extruder Upgrade for RepRap 3D printer Prusa i3 or Mini Kossel.
In Stock
$34.99

mpn: EXBLD_KIT, ean: 0719104610397,

This kit can help you improve your print quality by getting rid of filament slippage. Aluminum doesn't soften at printing temp like the plastic printed parts can, leading to less idler spring tension, filament slipping, bad prints. Hardware is includ...


[Gulfcoast Robotics] RepRap 3D Printer Switching Dual Input Single Nozzle Bowden Hotend 0.4 / 1.75 mm Filament.
[Gulfcoast Robotics] RepRap 3D Printer Switching Dual Input Single Nozzle Bowden Hotend 0.4 / 1.75 mm Filament.
In Stock
$41.99

mpn: CYCL_KIT, ean: 0719104610427,

This hotend is high-quality all metal (no plastic/PTFE parts in hot zone, except for thermistor wiring insulation) dual input, single output hotend. Printing with a Switching-Hotend is an exciting new frontier, although software and electronics setup...


[Gulfcoast Robotics] V2 Aluminum Y Carriage Plate Upgrade for Prusa i3 style 3D Printer
[Gulfcoast Robotics] V2 Aluminum Y Carriage Plate Upgrade for Prusa i3 style 3D Printer
In Stock
$25.99
$21.29
You Save: 18%

mpn: PYP2, ean: 0719104609704,

This is second version of aluminum Y Prusa i3 carriage upgrade plate. Acrylic or plywood Y carriage tend to deform under heat radiated from heated bed, during print. This deformation can affect print quality. Aluminum Y carriage plate will not be aff...


[Gulfcoast Robotics] MK10 Extruder Hotend for 3D Printer Maker Select Wanhao Duplicator. Quality CNC - Made by US Company with Quality and Precision
[Gulfcoast Robotics] MK10 Extruder Hotend for 3D Printer Maker Select Wanhao Duplicator. Quality CNC - Made by US Company with Quality and Precision
In Stock
$19.99

mpn: HEMK10M3_C1, ean: 0719104610540,

Our parts manufactured by US company with high CNC quality and tight tolerance. This hotend will fit all OEM MK10 extruders. This MK10 version is for extruder with thermistors. It has heater block with small hole to accept thermistor and M3 tapped ho...


[Gulfcoast Robotics] RepRap 3D Printer High Print Speed Print Pack 1.75mm Filament + 5 nozzles, 24V Heater and Thermistor.
[Gulfcoast Robotics] RepRap 3D Printer High Print Speed Print Pack 1.75mm Filament + 5 nozzles, 24V Heater and Thermistor.
In Stock
$13.99

mpn: VK175V24, ean: 0719104610724,

Everything you need to start exploring large format 3D-Printing! This set is an add on for your Hotend to boost the speed of printing with vastly increased melt rates and epic layer adhesion. This product is fully compatible with V5, V6 Hotends and c...


[Gulfcoast Robotics] Z-Brace Frame Support Kit for Wanhao Duplicator i3 and Maker Select V1, V2 and V2.1 3D Printers
[Gulfcoast Robotics] Z-Brace Frame Support Kit for Wanhao Duplicator i3 and Maker Select V1, V2 and V2.1 3D Printers
In Stock
$39.99

mpn: ZBRACE, ean: 0719104610014,

This kits is a result of our effort to improve existing and popular Z-brace kits based on 3D printed parts. Our kit is fully metal kit, no printed parts. It looks minimal compared to the 3D printed Z-brace designs, but it will make your frame complet...


[Gulfcoast Robotics] 3 PCS Build Platform Heated Bed Stickers for 3D Printer 220x220mm
[Gulfcoast Robotics] 3 PCS Build Platform Heated Bed Stickers for 3D Printer 220x220mm
In Stock
$13.99

mpn: STICKER_3, ean: 0719104610205,

3 PCS self sticky pads for 3D Printer build plate. 3M adhesive backing.Compatible with wide range of build plates and 3D Printer types. Good adhesion for any type of plastic filament. 220x220mm size, 3 PCS Stcikers in a package. Stcickers branded "Re...


[Gulfcoast Robotics] All Metal V6 Direct Extruder Hotend for 3D Printer - 12V /1.75mm Filament / 0.4mm Nozzle.
[Gulfcoast Robotics] All Metal V6 Direct Extruder Hotend for 3D Printer - 12V /1.75mm Filament / 0.4mm Nozzle.
In Stock
$18.99

mpn: V6D17504, ean: 0719104609278,

This hotend is All Metal no PTFE liner inside heat break, you can print high temperature plastics with it. Hotend is equipped with NTC3950 thermistors, 12V 40W heater and 12V cooling fan. NTC 3950 Thermistor parameters: Use TEMP Sensor number 11 in ...


[Gulfcoast Robotics] Y Carriage Plate Upgrade for Maker Select and Wanhao Duplicatior i3 3D Printers
[Gulfcoast Robotics] Y Carriage Plate Upgrade for Maker Select and Wanhao Duplicatior i3 3D Printers
In Stock
$27.99
$23.71
You Save: 15%

mpn: PYP4, ean: 0719104609711,

Please note that this product was designed only for Wanhao Duplicator, Maker Select and similar 3D Printers with 140mm distance between Y rods. Do not use this product for typical Prusa i3 like 3D Printer with 170mm Y rods distance. We have different...


[Gulfcoast Robotics] Borosilicate Glass for Wanhao Duplicator i3 Anet A8 MP Maker Select 3D Printers, 4mm Thick.
[Gulfcoast Robotics] Borosilicate Glass for Wanhao Duplicator i3 Anet A8 MP Maker Select 3D Printers, 4mm Thick.
In Stock
$25.99
$21.99
You Save: 15%

mpn: BG219C, ean: 0719104610038,

100% borosilicate glass, flat, heat resistant plate, does not warp during long term use. 4mm thick - will not break when you remove your print from it. Plate fully matches 220x220mm heated bed on many popular 3D printers. This plate is larger and th...


[Gulfcoast Robotics] All Metal V6 Hotend 1.75mm Bowden Extruder for Prusa i3 Reprap 3D Printer. Deluxe Kit.
[Gulfcoast Robotics] All Metal V6 Hotend 1.75mm Bowden Extruder for Prusa i3 Reprap 3D Printer. Deluxe Kit.
In Stock
$24.99

mpn: V6B17504DX, ean: 0719104609254,

Hotend is equipped with NTC3950 thermistors and 12V 40W heater, 12V fan. It is pre-assembled with all metal heatbreak and 0.4mm nozzle. Get all necessary spare parts in one kit. Deluxe kit includes extra parts: 2 x extra heatbreaks, one all metal, an...


[Gulfcoast Robotics] Rear Mounted Z-Brace Frame Support Kit for Wanhao Duplicator i3 and Maker Select Plus 3D Printers
[Gulfcoast Robotics] Rear Mounted Z-Brace Frame Support Kit for Wanhao Duplicator i3 and Maker Select Plus 3D Printers
In Stock
$39.99

mpn: ZBRACE_PR, ean: 0719104610021,

This kit is our newest design that replaces previously popular PLUS 3D Printer Z-brace kit. New kit is rear mounted and will allow better access to print platform. In our kit we use ball joints to eliminate any tension created by misalignment between...


[Gulfcoast Robotics] Aluminum Y Carriage Plate Upgrade for Anet A8 3D Printer
[Gulfcoast Robotics] Aluminum Y Carriage Plate Upgrade for Anet A8 3D Printer
In Stock
$25.99
$21.87
You Save: 16%

mpn: PYP5, ean: 0719104609728,

This product is an upgrade stock Y carriage plates on popular Anet A6 and A8 3D Printers. Plate is made of tempered aluminum alloy, brushed and anodized for perfect flatness and pleasing surface finish. This product will fix leveing issues that you m...


[Gulfcoast Robotics] Thermistor Upgrade for Maker Select Plus and Wanhao Duplicator i3 Plus 3D Printers.
[Gulfcoast Robotics] Thermistor Upgrade for Maker Select Plus and Wanhao Duplicator i3 Plus 3D Printers.
In Stock
$12.99
$10.99
You Save: 15%

mpn: NTC3950_CWM, ean: 0719104609551,

Our thermistor can replace stock thermistor in Duplicator i3 / Maker Select V1, V2, V2.1 and Plus 3D Printers. Thermistor assembled with 600C rated ceramic glue and fiberglass insulation wires. Wiring insulation can withstand much higher heat than st...


[Gulfcoast Robotics] 2 PCS MK10 Extruder Hotend Heater Block fits MP Maker Select Duplicator i3 3D Printer - Made by US company with quality and precision.
[Gulfcoast Robotics] 2 PCS MK10 Extruder Hotend Heater Block fits MP Maker Select Duplicator i3 3D Printer - Made by US company with quality and precision.
In Stock
$15.99

mpn: BLKMK10M3_2, ean: 0719104610250,

This MK10 heater block version is for extruder with thermistor only, it has M3x0.5 tapped hole to accept M3 clamping screw with washer.If you are looking for FlashForge version of MK10 block with M4x0.7 tapped hole - please check ASIN B078JDHD4M Plea...


[Gulfcoast Robotics] All Metal V6 Bowden Extruder Hotend for 3D Printer 1.75mm Filament / 0.4mm Nozzle
[Gulfcoast Robotics] All Metal V6 Bowden Extruder Hotend for 3D Printer 1.75mm Filament / 0.4mm Nozzle
In Stock
$18.99

mpn: V6B17504, ean: 0719104609247,

Hotend is equipped with NTC3950 thermistor and 12V 40W heater This hotend is a replica of newest, popular V6 hotend. All metal design, no PTFE in hot zone - capable of printing high temperature melting point plastics such as nylon and polycarbonate. ...



Viewing Page 1 of 1

Feel free to Browse Our Catalog.



Privacy Policy / Terms of Service
© 2018 - metalbot.org. All Rights Reserved.