All-Metal V6 J-Head Hotend Full Kit with 5 Pcs Extruder Brass Print Head + 5 Pcs Stainless Steel Nozzle Throat for E3D V6 Makerbot RepRap 3D Printers

Product description

All-Metal V6 Hotend Full Kit with 5 Pcs Extruder Brass Print Head + 5 Pcs Stainless Steel Nozzle Throat for E3D V6 Makerbot 3D Printers

Specification of All Metal V6 Hotend Full kit:
12V/40W heater, the temperature can up to 280°C（Long-term temperature: 240°C/ short-term temperature: 280°C）
12V high speed fan with shroud
One meter long PTFE/teflon tubing 4mm OD 2mm ID
PC4-01 Tube Fitting

Specification of Extruder Tube:
Type : Nozzle Throat
Outer Thread : M6 M7
Nozzle Throat Outer Diameter:6mm
Nozzle Throat Inner Diameter:4mm
Teflon Pipe Inner Diameter : 2mm
Length : 22.5mm
Filament Diameter : 1.75mm
Material : Stainless Steel

Specification of Brass Nozzle:
Type : Extruder Brass Nozzle Print Head
Color: Golden
Material: brass
Input Diameter: 1.75mm
Output Diameter: 0.2mm 0.3mm 0.4mm 0.5mm

Note:
Compatibility:Compatible with all 1.75mm V6 E3D Makerbot 3D printer

Attention: Small parts, keep away from children

package including:
1 x All Metal V6 hotend 12V/40W/1.75mm/0.4mm Nozzle / Extruder
1 x 12V high speed fan with shroud
1 x One meter long PTFE/teflon tubing 4mm OD 2mm ID
1 x PC4-01 Tube Fitting
1 x 0.2mm Nozzle Print Head
1 x 0.3mm Nozzle Print Head
2 x 0.4mm Nozzle Print Head
1 x 0.5mm Nozzle Print Head
5 x 1.75mm Stainless Steel Nozzles Throat
1 x M4 Hex driver.

View More In 3D Printer Accessories.

Or Browse Our Catalog.

3Dmate BASE is a multi-purpose transparent 3D silicone mat. A creation tool for building and creating designs using a 3D pen. Suitable and fun for all levels - from beginner to expert, kids and adults. Heat resistant up to 260° C (500° F) - Works w...

UCHOOSE, a King Professional 3D printer and Printing Parts Store. For High Quality & Good Service, we are diligent to Do Our Best! These dampers reduce stepper motor noise and vibration. Excellent anti-vibration dampers for quiet stepper motors. ...

Specifications: Material: Aluminum Dimensions: 20*20*10mm(LWH) Net Weight: 7g/pcs Inner hole for set screw: M6 and M3 (heat pipe and thermocouple) Heater Mounting Hole: 6mm diameter Thermocouple Mounting Holes:3mm diameter Suitable for Makerbo...

This 3D Printer tool kit will make your 3D printing/DIY easy and the printed results spectacular. Specification of Extruder Tube: Type : Nozzle Throat Compatibility : 3D Printer Outer Thread : M6 Nozzle Throat Outer Diameter:7mm Nozzle Throat In...

PLA (Polylactic Acid) is a material for the FFF (also known as FDM) 3D printing technology. The advantage of this material is that it can be easily used in 3D printers, allowing high quality printing, resulting in excellent detail and lamination of t...

This kits is a result of our effort to improve existing and popular Z-brace kits based on 3D printed parts. Our kit is fully metal kit, no printed parts. It looks minimal compared to the 3D printed Z-brace designs, but it will make your frame complet...

1. Each needle has a label that marks the diameter of it. To make it easier to clean up, you can use a small diameter needle first and then use a needle with the right diameter;2. Don't use the needle to clean until the nozzle is heated to above 200â...

Package: *Mounting screws *Aluminum MK8 'Extruder' frame, with bored intake hole. *Bushing *Spring *Brass 'extruder' drive gear *35 mm long teflon intake guide. (keeps filament away from Z-screw rod) *Special Bowden tube fitting (improved over stock)...

100% factory supply !!! 100% brand new and of high quality. Length of the Extension cable: about 1m / 3.28ft Net Weight: about 401g Package List: 1 x extension cable kit for CR-10/10S/CR-10 400/CR-10 500 series 3D printer100% Creality Origin...

Motherboard Features: 1. Highly integrated one board, to solve the Ramps1.4 modular interface cumbersome, easy to trouble the problem. 2. Optimize the layout of the alignment and cooling design, so that the whole board performance more stable. 3. Sup...