AMOLEN 3D Printer Filament, Frosted Bronze 1.75mm PLA Filament +/- 0.03 mm, 225G/0.5 lbs Spool, Includes Sample Marble Filament - 100% USA
Super Savings Item! Save 36% on the AMOLEN 3D Printer Filament, Frosted Bronze 1.75mm PLA Filament +/- 0.03 mm, 225G/0.5 lbs Spool, Includes Sample Marble Filament - 100% USA by AMOLEN at 3D Printing Supplies Outlet. MPN: 3DBRZCOP2. Hurry! Limited time offer. Offer valid only while supplies last. Amolen Bronze Filled PLA filament is hybrid made by polylactic acid and superior metal powder particles, made with 3 layers 0.1mm filtering
Bronze has all features of PLA, it is full of metallic luster and frosted tactility, corrosion resistance and can be polished.
Spool N.W: 0.5 lbs / spool
Filament: 1.75mm bronze filled
Spool Diameter: 5.57"- Spool Width:1.3"- Spool Hub Hole Diameter:2.17"
box size: 6.1 * 2 * 5.9 inch
package includes: 1 roll bronze filled filament, 1 bag marble like 5-meter filament sample
*PLA (Polylactic Acid) 3D Printer Filament Vacuumed Sealed With Desiccant
*High strength, better toughness, low odor, no warping
*Smoothly print,wrapped orderly, melt well, feed smoothly and constantly without clogging the nozzle or extruder.
*Diameter Accuracy can be controlled within ±0.03mm
*Degradation rate can reach 100%, do no harm to environment.
General printing tips:
1.It's better to use 4 mm or larger nozzle. Low print speed is recommended.2mm nozzle may lead jamming.
2.Clean or change the nozzle before printing is good way to reduce jam if for many times.
3.Finding perfect gap between nozzle and print platform is important to get nice prints. We prefer place an A4 paper between their gap, if we can pull out the paper intact with some strength, then it is perfect height.
4.PLA Filament adheres well to acrylic and blue painter's tape, we prefer to use blue tape on the build plate with no raft.
5.Place remitting filament back to original vacuum bag and stock them in a cool and dry place after print. Filament can absorb moisture from air and affect its quality and performance.
6.It's better try to release the filament to its original status after print, keep it bend at certain degree on your printer may cause break for your next print.
Features & Highlights
- HIGH COMPATIBILITY - Perfectly compatible with most of the 3D Printer, 1.75mm pla filament consistent diameter, dimensional accuracy +/- 0.03mm
- METALLIC COLOR - Bronze PLA filament fused with superior metal powder particles, the surface presents natural metallic color and luster with frosted tactility
- SMOOTHLY PRINT- Orderly wrapped, melt well, feed smoothly and constantly without clogging the nozzle or extruder
- PREMIER MATERIAL - Raw materials are from USA, eco-friendly with good performance
- HIGH PERFORMANCE - Good shaping, no bubble, no jamming, no warping
|Item Weight:||0.51 pounds|
|Item Size:||2.1 x 1.3 x 1.3 inches|
|Package Weight:||0.84 pounds|
|Package Size:||6.06 x 2.09 x 2.09 inches|