ANET 12V - 24V Self Assembly Highly-Integrated Control Board/Mother Board/Mainboard for ANET A6 Desktop 3D Printer Reprap i3 Kit (1PCS)
ANET 12V - 24V Self Assembly Highly-Integrated Control Board/Mother Board/Mainboard for ANET A6 Desktop 3D Printer Reprap i3 Kit (1PCS) by Anet at 3D Printing Supplies Outlet. MPN: Anet-0004. Hurry! Limited time offer. Offer valid only while supplies last. Motherboard Features: 1. Highly integrated one board, to solve the Ramps1.4 modular interface cumbersome, easy to trouble the problem. 2. Optimize
1. Highly integrated one board, to solve the Ramps1.4 modular interface cumbersome, easy to trouble the problem.
2. Optimize the layout of the alignment and cooling design, so that the whole board performance more stable.
3. Support automatic leveling proximity probe, the customer can add their own automatic leveling leveling.
4. Large USB, more stable connection, the interface is more concise, wiring more convenient, more stable work, longer life.
5. The use of onboard 4 A4988 16 subdivision stepper drive board motor drive (Z axis two motor interface).
6. PWM DC 3-way output (1 large current, 3-way current, 2 small current).
7. The use of high-performance low resistance through the Mos tube to do the drive, cooling better.
8. The use of ST original power supply chip to support 12V - 24V power input to solve the Ramps voltage conversion chip heating problem.
9. Configuration and Ramps1.4 exactly the same, can be directly replace Ramps1.4.
10. Can be directly connected Ramps1.4, 2004 LCD control panel and 12864 LCD control panel ( remove the L-type adapter board ).
Suitable for: Anet A6 3D Printer
Voltage Input: 12V - 24V
Mainboard Size: 10 * 9.5 * 2cm / 3.9 * 3.7 * 0.8in
Mainboard Weight: 63g / 2.2oz
Package Size: 12 * 11 * 3cm / 4.7 * 4.3 * 1.2in
Package Weight: 80g / 2.8oz
1 * Mainboard for Anet A6 3D Printer
Please pay more attention to the circuit diagram showed in the picture before mount it.
Features & Highlights
- Highly-integrated mother board for Anet A6 3D Printer, easy for connection and operation.
- Adopts for MOS with high-perforamnce as a driver, great heat dissipation effect.
- 12V - 24V power supply input receivable, with USB port.
- Upgrading circuit design offers it stable performance.
- Support the connection for Ramps1.4, 2004 LCD and 12864 LCD control board.
|Package Weight:||0.18 pounds|
|Package Size:||4.41 x 1.02 x 1.02 inches|
Have questions about this item, or would like to inquire about a custom or bulk order?
If you have any questions about this product by Anet, contact us by completing and submitting the form below. If you are looking for a specif part number, please include it with your message.
Related Best Sellers
The Titan Extruder is E3D's latest addition to their modular ecosystem, which means it works perfectly with your installed E3D hotend, and will allow users to upgrade their 3D printer's entire extrusion system! The E3D Titan is an amazing lightweig...
By Creality 3D
mpn: CR-Dual Z, ean: 0667797511401,
It is specially for Creality CR-10, The printer will be much more stable if you add this kit. There will be an assembly instruction for you after buying it This kit is the original replacement parts for Cr-10. Package List: 1x Lead Screw Bracket ...
mpn: 112031-00, ean: 0817913013924,
The MakerBot Replicator+ flex build plate Kit**. compatible with the Replicator+, this Kit includes the bendable flex build plate so you can easily remove prints. Attached on top of it is the grip surface for better adhesion when printing as well as ...
mpn: HG251TC4, ean: 0686603768532,
►These special HeatBreaks are additionally made from TC4 Titanium. This material is exceptionally strong and has lower thermal conductivity than stainless steel, allowing you to keep the cold side of your HotEnd even colder. This creates a more sha...
mpn: CC-Glass-310, ean: 0667797513252,
Perfect fix with CR-10/10S Specification: Material:Glass Size: 310x310 Thickness: 3mm Package content: 1 x Glass BedIt has a melt temperature of about 800° C and a very low thermal expansion coefficient.. Resistant to thermal shock compared...
mpn: BT41-01, ean: 0080596040574,
Using build tape on the Dremel Idea Builder 3D40 printer makes removing 3D prints from the build plate easier. Each build tape sheet applies easily to the build plate and leaves no messy residue when removed. Prints come out better and the build plat...
By Gizmo Dorks
mpn: GD-70917-5P, ean: 0887503170917,
The 3M 468MP sheet has a high performance 3M acrylic adhesive that bonds extremely well to plastic and metal. It performs well under hot/cold cycles and temperatures up to 400 F. The outstanding shear strength of the adhesive provides resistance agai...
mpn: FT-3D03, ean: 0606227917864,
Specification of Brass Nozzle: Type : 0.4mm Extruder Brass Nozzle Print Head Color: Golden Material: brass Size: 5*13mm Input Diameter: 1.75mm Output Diameter: 0.4mm Specification of drill kit: Type :Drill kit Material: silicone Bit diameter: 0.4mm T...
mpn: HIC20170901JCT, ean: 0649910157574,
Product FeaturesMaterial: Aluminum & Stainless Steel & BrassInstallation type: external thread connectionScope of application: 3D printerNozzle size: 0.4mmThroat pipe length: 30mmOperating temperature range： -40 ~ +260°C (-40 ~ +500 °F)Package in...
mpn: 3DPARTS008, ean: 6903388512940,
Description:Use these cables enjoy your all of your electronic projects,Such as 3D printers, Arduino motherboards, modules and so on.Package includes:3pcs 70cm 2pin F-F Wires6pcs 70cm 3pin F-F Wires5pcs 70cm 4pin F-F WiresCable Length:70cm.. Cable At...