Anet Auto Leveling A8 Mainboard, 12V-24V Replacement Control Board/Motherboard for Auto Leveling A8 3D Printer
Anet Auto Leveling A8 Mainboard, 12V-24V Replacement Control Board/Motherboard for Auto Leveling A8 3D Printer by Qibei at 3D Printing Supplies Outlet. MPN: Q_0021. Hurry! Limited time offer. Offer valid only while supplies last. Mainboard Specifications: Brand: Anet Type: Auto Level A8 mainboard Suitable for: Anet A8 3D Printer Voltage Input: 12V Motherboard Features: 1.
Type: Auto Level A8 mainboard
Suitable for: Anet A8 3D Printer
Voltage Input: 12V
1. Highly integrated one board, to solve the Ramps1.4 modular interface cumbersome, easy to trouble the problem.
2. Optimize the layout of the alignment and cooling design, so that the whole board performance more stable.
3. Support automatic leveling proximity probe, the customer can add their own automatic leveling leveling.
4. Large USB, more stable connection, the interface is more concise, wiring more convenient, more stable work, longer life.
5. The use of onboard 4 A4988 16 subdivision stepper drive board motor drive (Z axis two motor interface).
6. PWM DC 3-way output (1 large current, 3-way current, 2 small current).
7. The use of high-performance low resistance through the Mos tube to do the drive, cooling better.
8. The use of ST original power supply chip to support 12V power input to solve the Ramps voltage conversion chip heating problem.
9. Configuration and Ramps1.4 exactly the same, can be directly replace Ramps1.4.
10. Can be directly connected Ramps1.4, 2004 LCD control panel and 12864 LCD control panel ( remove the L-type adapter board ).
1 * Auto Level A8 Mainboard
Please pay more attention to the circuit diagram showed in the picture before mount it.
Features & Highlights
- Highly-integrated mainboard for Anet Auto Leveling A8 3D Printer, easy for connection and operation;
- Environmentally friendly: Raw materials is non-toxic and non-stimulating taste, biodegradable materials, to ensure healthily printing;
- Less warping: Forming without edge warp and bubbles, which make the printing is better, smoother, more delicate, and the color is more accurate;
- Not easily damp: Long time storage after opening. Vacuumed sealed is not easy to damp and bubbles, which make print is more stable;
- printing temperature: 190°C - 220°C;
Have questions about this item, or would like to inquire about a custom or bulk order?
If you have any questions about this product by Qibei, contact us by completing and submitting the form below. If you are looking for a specif part number, please include it with your message.
Related Best Sellers
mpn: RD005, ean: 0650226282256,
Packing list: 1 * Heating Controller (12V / 24V , Over 30A) for 3D Printer Hotbed 1 * 30cm signal cable for hotbedVoltage: 12V or 24V; Max Current: over 30A. Maximum current of the MOSFET: 280A. Maximum power of hot bed: Over 360W (12V) or 720W (24V)...
mpn: Silent Device, ean: 0711102060051,
Apply to 3D printer kossel Rostock Duplicator Pursa i3 Ultimaker Lulzbot Tevo CR-10 and others, this product mainly protects the stepper motor drive, especially the DRV8825 TMC2100 TMC2130 TMC2208 drive! ! When using the drive inserted in the device ...
The RUMBA (R.eprap U.niversal M.ega B.oard) control board provides a fully integrated all-in-one solution. Fully integrated all in one solution Arduino 2560-R3 compatible (works with Sprinter, Repetier, Marlin out of the box) (easy to change/flash fi...
This full graphic smart LCD controller comes with a large 128 x 64 LCD display with a SD card reader for untethered printing and onboard control. Contents of package: 128 x 64 LCD with SD card reader 8GB SDHC card (or, micro SDHC card with adapter)...
CNC Shield V3.0 features: Latest Arduino CNC Shield Version 3.0. GRBL 0.8c compatible.(Open source firmware that runs on an Arduino UNO that turns G-code commands into stepper signals) 4-Axis support(X, Y, Z , A-Can duplicate X,Y,Z or do a full 4th a...
mpn: 43217-146645, ean: 0603894528881,
Rumba is the core of a 3D printer, carver, laser cutter and other CNC 1.5pcs temperature sensor interface input; 2.All pins are drawn to facilitate more features to expand. 3.Servo expansion interface, easy to add automatic leveling function; 4.PW...
mpn: A4988, ean: 0699419859059,
Specifications: CNC Shield Board: Runs on 12-36V DC 2 x End stops for each axis (6 in total) 4-Axis support (X, Y, Z , A-Can duplicate X,Y,Z or do a full 4th axis with custom firmware using pins D12 and D13) compatible with engraving machines, 3D pri...
mpn: 2016009100, ean: 0705586405309,
Notice: ★MKS TFT32 do not support external power supply, can't work with Ramps1.4. ★The TFT doesn't support MPCNC at this time, we are upgrading the firmware★Please download and copy the firmware in a Windows computer, Apple computer will cau...
mpn: KINGPRINT-3D0411A005, ean: 0603894528935,
NOTE: 1. When energized, do not connect to the motherboard or replace the different module interfaces. 2. Pay attention to the Positive and negative of the wire. 3. Please check to determine whether the connection interface is correct, so as not to...
mpn: TMC2208 Black, ean: 0711102060150,
Specifications: ●MicrIsteps: 256 segments ●Model: Stepper Motor Driver TMC2208 ●Drive current: 1.4A ●Peak current: 2A ●Voltage range: 4.75V-36VSize: TMC2208 (LWH): 20 x 15 x 11 mm/ 0.78" x 0.59 x 0.43 Heat Sink (LWH): 9 x 9 x 12 mm/ 0.35" ...