Anet E10 Mainboard, 12V-24V Replacement Control Board/Motherboard for E10 3D Printer
Anet E10 Mainboard, 12V-24V Replacement Control Board/Motherboard for E10 3D Printer by Qibei at 3D Printing Supplies Outlet. MPN: Q_0024. Hurry! Limited time offer. Offer valid only while supplies last. Mainboard Specifications: Brand: Anet Type: E10 mainboard Suitable for: Anet A8 3D Printer Voltage Input: 12V Motherboard Features: 1. Highly
Type: E10 mainboard
Suitable for: Anet A8 3D Printer
Voltage Input: 12V
1. Highly integrated one board, to solve the Ramps1.4 modular interface cumbersome, easy to trouble the problem.
2. Optimize the layout of the alignment and cooling design, so that the whole board performance more stable.
3. Support automatic leveling proximity probe, the customer can add their own automatic leveling leveling.
4. Large USB, more stable connection, the interface is more concise, wiring more convenient, more stable work, longer life.
5. The use of onboard 4 A4988 16 subdivision stepper drive board motor drive (Z axis two motor interface).
6. PWM DC 3-way output (1 large current, 3-way current, 2 small current).
7. The use of high-performance low resistance through the Mos tube to do the drive, cooling better.
8. The use of ST original power supply chip to support 12V power input to solve the Ramps voltage conversion chip heating problem.
9. Configuration and Ramps1.4 exactly the same, can be directly replace Ramps1.4.
10. Can be directly connected Ramps1.4, 2004 LCD control panel and 12864 LCD control panel ( remove the L-type adapter board ).
1 * E10 Mainboard
Please pay more attention to the circuit diagram showed in the picture before mount it.
Features & Highlights
- Highly-integrated mainboard for Anet E10 3D Printer, easy for connection and operation;
- Environmentally friendly: Raw materials is non-toxic and non-stimulating taste, biodegradable materials, to ensure healthily printing;
- Less warping: Forming without edge warp and bubbles, which make the printing is better, smoother, more delicate, and the color is more accurate;
- Not easily damp: Long time storage after opening. Vacuumed sealed is not easy to damp and bubbles, which make print is more stable;
- printing temperature: 190°C - 220°C;
Have questions about this item, or would like to inquire about a custom or bulk order?
If you have any questions about this product by Qibei, contact us by completing and submitting the form below. If you are looking for a specif part number, please include it with your message.
Related Best Sellers
mpn: 43237-2, ean: 0686603768792,
►Product Specifications: - 2-Phase motor can control the forward and reverse rotation - With 1-2, w1-2, 2W1-2, 4W1-2 phase excitation mode. - Only the clock pulse signal can be driven two-phase bipolar stepper motors to achieve low vibration, high ...
Specifications:Flat Width: 70mm/2.76-inchRated Voltage:300VShrinkable Temperature:80CTemperature Range: -40C to +105CShrinking Rate: 48%(cross section)and 5%(longitudinal)Length: 5M/196.85-inchColor: ClearFeatures:Heating Tool: Hot Air GunThis heat s...
Overview This full graphic Smart Controller contains a SD-Card reader, an rotary encoder and a 128 x 64 dot matrix LCD display. You can easy connect it to your Ramps board using the "smart adapter" included. After connecting this panel to your Ramp...
mpn: 17HS15-0406S, ean: 0701056339488,
This hybrid unipolar stepper motor with 1.8 deg. step angle (200 steps/revolution). Each phase draws 400mA at 12V, allowing for a holding torque of 26Ncm(37oz.in). Electrical Specification: * Manufacturer Part Number: 17HS15-0406S * Motor Type: U...
mpn: GT2560, ean: 0721968003383,
Features: 1. Space-saving with compacted volume. 2. Integrated peripherals ensure much more stable connection. 3. Added heat sink provide better heat dissipation for MOSFET. 4. Separate control for fan and extruder. 5. Support LCD2004 and LCD128...
mpn: LW-DZ-000092, ean: 6930864921576,
Size: 11.5cm x 3cm. Package include:1x 3D Printer Controller boardSuit for 5 Pololu stepper driver plate. Integrated 5A extra safety and components protection.. With heater output/three thermistor MOSFET.. Servo connector used to connect end dog, mot...
mpn: TE887, ean: 4894623742081,
Features: 2560 and Ramps 1.4 are integrated in the board, which avoids the complicated connectors. Support a variety of stepper drivers such as A4988, DRV8825, TMC2100 and LV8729, available to change the stepper drivers and motors as users like. Rese...
mpn: BIQU-ZZB000164+ZZB000069+K202+L102, ean: 0711176310410,
Specification: 2004LCD: >Using a large screen 2004LCD(3.2'), it can support 8 GB >With a SD card base on back, put slicing file into the SD card and select the file on the LCD, then can be printing >Product comes encoder parameter adjustment can be a...
mpn: NV21L1174NJFV9Z, ean: 0191599837167,
DescripitonThis item is a silicone protective case for MK7/MK8/MK9 aluminum heater block. It is a great accessory for 3D printer.Features- Color: Coffee- Material: Silicone- Size: 2x2x1cm- Made from premium silicone, it is flexible and stretchy.- Pro...
mpn: 101-91-100, ean: 6955170832255,
Overview : It is designed to fit the entire electronics needed for a RepRap in one small package for low cost. RAMPS interfaces an Sainsmart Mega with the powerful Sainsmart MEGA platform and has plenty room for expansion. The modular design includes...