Auto Bed Leveling Sensor, FYSETC 3D Printer Parts Automatic Leveling Module Film Pressure Probe Type with for Delta Kossel Prusa i3 E3D V6 MK8 Makerbot Extruders-2Pcs
Auto Bed Leveling Sensor, FYSETC 3D Printer Parts Automatic Leveling Module Film Pressure Probe Type with for Delta Kossel Prusa i3 E3D V6 MK8 Makerbot Extruders-2Pcs by FYSETC at 3D Printing Supplies Outlet. MPN: 2P Sensor. Hurry! Limited time offer. Offer valid only while supplies last. 1. ''Automatic leveling'' can automatically detect the compensation value between the printing platform and the print nozzle according to the
2. Picture 5,The auto-leveling method of the 3D printing board adopts a non-linear leveling matrix network format. The advantage of this leveling method is that it can level out non-linear planes, such as PCB hot beds with bumps.
Please kindly Note:
Do not use the leveling sensor when the nozzle temperature is higher than 45 degrees!!!
2 x Auto-leveling module
2 x signal line (1 meter)
4 x Touch type head
Picture 5 Parameter Description:
1. X-axis direction offset: the offset of the leveling probe relative to the print nozzle in the X-axis direction;
2. Y-axis direction offset: the offset of the leveling probe relative to the printing nozzle in the Y-axis direction;
3. Z-axis direction offset: the distance from the platform to the print head when the leveling probe detects the platform;
4. Probe stowed angle: the angle of the servo for the leveling probe when the probe is stowed/retracted/up (can ignore this when not in use);
5. Probe open angle: the angle of the servo for the leveling probe when the probe is deployed/down (can ignore this when not in use);
6. Number of leveling points: The number of probe points that probe on the plane. The actual number of detected points is equal to the square of the set value. For example, if set to 4 points, 16 points are actually detected, and the maximum is 9, namely 81 points;
7. Probe trigger mode: Set the level state when the leveling probe is triggered.
Features & Highlights
- Compared with 3D touch, cheaper and practical: Compatible with almost type of 3D Printers motherboards, plug and play, comes with four leveling Sensor head: E3D V6 MK8 Makerbot Ultimaker;
- Excellent 3D Printer Accessories: no need to debug, the default trigger distance 0.1MM,the average service life of the module is more than 500,000 times;
- High precision, leveling adjust accuracy can be up to +/- 0.05mm;
- Good compatible ability: It could work with any kinds of bed materials, such as glasses, woods, metals, and so on;
- After Sales Guarantee: we are responsible seller, if you need more help, please feel free to email us, we will give you help within 24 hours.
|Part Number:||2P Sensor|
|Package Weight:||0.04 pounds|
|Package Size:||5.1 x 0.4 x 0.4 inches|