Login       My Wishlist
  My Cart
$0.00 / 0 items
 
3D Printing Supplies Outlet
3D Printers & Essential Supplies
 
International Access
Global Shipping Options Available
  Our Catalog   3D Printer Parts & Accessories   3D Printer Controllers

BIQU KFB3.0 3D Control Board +LCD 2004 Module Display Monitor Motherboard + A4988 Stepstick Stepper Motor Driver Module for Reparp Mendel Prusa I3 Kossel 3D Printer


Free Shipping Included! BIQU KFB3.0 3D Control Board +LCD 2004 Module Display Monitor Motherboard + A4988 Stepstick Stepper Motor Driver Module for Reparp Mendel Prusa I3 Kossel 3D Printer by BIQU at 3D Printing Supplies Outlet. Hurry! Limited time offer. Offer valid only while supplies last. Specification: Size: 10mm*10mm Power Input: 12V ~ 40V Support for Motor Drive Type: A4988, DRV8825, TMC2100 Support Control Screen: LCD2004,


Product Description

Specification:
Size: 10mm*10mm
Power Input: 12V ~ 40V
Support for Motor Drive Type: A4988, DRV8825, TMC2100
Support Control Screen: LCD2004, LCD12864. LCD1602, touch color screen
Compile Environment: Arduino IDE firmware: Marlin
Net Weight: 105g/pcs
2004LCD Board Size: 150mm*55mm

Notice:
*When energized, do not connect to the motherboard or replace the different module interfaces(except SD, USB)
*Pay attention to the Positive and Negative of the wire
*Please check to determine whether the connection interface is correct, so as not to damage the motherboard before open telegram
*When occurs in emergency, please press the RESET button on the motherboard or disconnect

Package List:
1xKFB3.0 3D Control Board
1 x 2004LCD Display Board
1 x LCD Line (30cm length)
5xA4988 Stepper Motor Driver
1 x USB Data Line (50cm Length)

Features & Highlights

  • The power buck chip using XL1509 chip, high efficiency, stability. short circuit protection, 150KHz fixed switching frequency 2A current input 12 ~ 40V input voltage
  • USB serial chip using CH340T chip, the largest 2Mbps, communication Stable, to solve the streamlined version of the Windows driver can not be installed Problem, support for a full range of Windows, mac, liunx operating system
  • Heatbed MOS tube with F8736 chip, the maximum 18A current. Tantalum capacitor filter acquisition temperature, anti-interference, more accurate
  • The processor uses tamega2560 chip, 54 output to meet the various Output Interface
  • The max support only 12V, supportA4988, DRV8825 and TMC2100

Additional Information

Manufacturer:BIQU
Brand:BIQU
Publisher:BIQU
Studio:BIQU
UPC:711176310496
EAN:0711176310496
Package Weight:1 pounds
Package Size:2 x 2 x 2 inches

BIQU KFB3.0 3D Control Board +LCD 2004 Module Display Monitor Motherboard + A4988 Stepstick Stepper Motor Driver Module for Reparp Mendel Prusa I3 Kossel 3D Printer by BIQU

Buy Now:
BIQU KFB3.0 3D Control Board +LCD 2004 Module Display Monitor Motherboard + A4988 Stepstick Stepper Motor Driver Module for Reparp Mendel Prusa I3 Kossel 3D Printer

Brand: BIQU
4.4 out of 5 stars with 177 reviews
Condition: New
Lead Time: 1 - 2 Business Days
Availability: In Stock
$39.99


Quantity:  

 


 


Have questions about this item, or would like to inquire about a custom or bulk order?


If you have any questions about this product by BIQU, contact us by completing and submitting the form below. If you are looking for a specif part number, please include it with your message.

First Name:
Last Last:
Email Address:
Your Message:

Related Best Sellers


BIQU Mega2560 Control Board + LCD 12864 Graphic Smart Display Controller Module + Ramps 1.4 Mega Shield+A4988 Stepstick Stepper Motor Driver with Heat Sink for 3D Printer Arduino Reprap
By BIQU
mpn: BIQU-KIT00101,
Specification: 12864LCD: >Using a large screen 12864LCD(3.2'), it can support 8 GB >With a SD card base on back, put slicing file into the SD card and select the file on the LCD, then can be printing >Product comes encoder parameter adjustment can be...

Anet 12864 LCD Smart Display Screen Controller Module with Cable for RAMPS 1.4 Arduino Mega Pololu Shield Arduino Reprap 3D Printer Kit Accessory
By Anet
mpn: 43218-231, ean: 0738920349120,
Features: 12864 LCD smart controller for 3D printer. Supports for RAMPS 1.4 control board. Built-in encoder allows you adjusting the parameter and selecting file to print. Large size screen, clear white characters with blue backlit. Tuning and press ...

KINGPRINT Upgraded LCD 2004 Graphic Smart Display Controller Module with Adapter for 3D Printer
By KINGPRINT
mpn: KINGPRINT-PXS000030, ean: 0603894529635,
Specification: 2004LCD With Smart LCD Controller you can print 3D designs without USB connection to your computer. Package included: 1 * LCD 2004 Graphic Display 2 * 30mm cables-Popular RepRap 3D Printer LCD Controller and SD Card Reader. -The int...

BIQU 3D Printer RAMPS 1.6 Controller Board for Reprap Prusa Mendel Arduino Ramps1.4
By BIQU
mpn: BIQU-ZZB000164, ean: 0722970433328,
Product Parameters Size: 101.5 * 60.5mm Voltage:12V Power: 200W Patch MOS tube: B55NF06 Support motor drivers: support A4988,DRV8825 and other motor drivers(support five motor drivers Simultaneously) Specification: RAMPS1.6 is optimized and launched ...

KINGPRINT MKS TFT28 2.8-Inch Full-Color Touch Screen 3D Controller Board for 3D Printer
By KINGPRINT
mpn: KINGPRINT-PXS000027A01, ean: 0603894529406,
Specification: Support power-black-out data saving. 3D printer can continue print previous job after power is back. MKS TFT can support picture customization, you can design the boot logo ,all button pictures, font color, etc. by yourself. MKS TFT ca...

KINGPRINT GT2560 Controller Board with USB Cable for 3D Printer
By KINGPRINT
mpn: KINGPRINT-3D0233A01, ean: 0603894529277,
Specification: 1.Further compacted volume and space-saving. 2. Integrated peripherals ensure more stable connection. 3. Added heat sink provide better heat dissipation for MOSFET 4. Separate control for fan and extruder 5. Support LCD2004 and LC...

Quimat 3D Printer Controller Kit for Arduino Mega 2560 Uno R3 Starter Kits + RAMPS 1.4 with Upgraded Mosfet + 5pcs A4988 Stepper Motor Driver + LCD 12864 for Arduino Reprap
By Quimat
mpn: QK17,
Difference between 2016 and 2017 Version 2016 Old MOSFET IC Model : PDF55N06 VDSS:60V ID:55A 2017 New MOSFET IC model : HM60N06 VDSS:60V ID:60A,more durable and safety Product Features: 1).Mega 2560 R3 2).3D Printer Controller RAMPS 1.4 with high q...

KINGPRINT LCD 2004 Graphic Smart Display Controller Module with Adapter and Cable for 3D Printer
By KINGPRINT
mpn: KINGPRINT-L102A01, ean: 0603894529536,
Specification: 2004LCD-With Smart LCD Controller you can print 3D designs without USB connection to your computer.-Popular RepRap 3D Printer LCD Controller and SD Card Reader. -The intelligent controller includes an SD card reader, rotary encoders a...

BIQU Mega2560 Control Board + LCD 2004Graphic Smart Display Controller Module + Ramps 1.6 Mega Shield+DRV8825 Stepstick Stepper Motor Driver with Heat Sink for 3D Printer Arduino Reprap
By BIQU
mpn: BIQU-ZZB000164+ZZB000069+C101+L102, ean: 0711176310427,
Specification: 2004LCD: >Using a large screen 2004LCD(3.2'), it can support 8 GB >With a SD card base on back, put slicing file into the SD card and select the file on the LCD, then can be printing >Product comes encoder parameter adjustment can be a...

HESAI 3D Printer Kit Smart Parts LCD 12864 Display Monitor Motherboard Blue Screen Module for RAMPS 1.4 Controller Control Panel
By HESAI
mpn: A127-12864, ean: 0732240562535,
Specification:This full graphic Smart Controller contains a SD-Card reader, an rotary encoder and a 128 x 64 dot matrix LCD display. You can easy connect it to your Ramps board using the "smart adapter" included. After connecting this panel to your R...



Privacy Policy / Terms of Service
© 2019 - metalbot.org. All Rights Reserved.