BIQU Mega2560 Control Board + LCD 12864 Graphic Smart Display Controller Module + Ramps 1.6 Mega Shield+DRV8825 Stepstick Stepper Motor Driver with Heat Sink for 3D Printer Arduino Reprap
Free Shipping Included! BIQU Mega2560 Control Board + LCD 12864 Graphic Smart Display Controller Module + Ramps 1.6 Mega Shield+DRV8825 Stepstick Stepper Motor Driver with Heat Sink for 3D Printer Arduino Reprap by BIQU at 3D Printing Supplies Outlet. MPN: BIQU-ZZB000164+ZZB000069+C101+L101. Hurry! Limited time offer. Offer valid only while supplies last. Specification: 12864LCD: >Using a large screen 12864LCD(3.2'), it can support 8 GB >With a SD card base on back, put slicing file into the SD card
Have questions about this item, or would like to inquire about a custom or bulk order?
If you have any questions about this product by BIQU, contact us by completing and submitting the form below. If you are looking for a specif part number, please include it with your message.
Related Best Sellers
Mainboard Specifications: Brand: Anet Type: Auto Level A8 mainboard Suitable for: Anet A8 3D Printer Voltage Input: 12V Motherboard Features: 1. Highly integrated one board, to solve the Ramps1.4 modular interface cumbersome, easy to trouble the pro...
mpn: RD005, ean: 0650226282256,
Packing list: 1 * Heating Controller (12V / 24V , Over 30A) for 3D Printer Hotbed 1 * 30cm signal cable for hotbedVoltage: 12V or 24V; Max Current: over 30A. Maximum current of the MOSFET: 280A. Maximum power of hot bed: Over 360W (12V) or 720W (24V)...
mpn: Silent Device, ean: 0711102060051,
Apply to 3D printer kossel Rostock Duplicator Pursa i3 Ultimaker Lulzbot Tevo CR-10 and others, this product mainly protects the stepper motor drive, especially the DRV8825 TMC2100 TMC2130 TMC2208 drive! ! When using the drive inserted in the device ...
The RUMBA (R.eprap U.niversal M.ega B.oard) control board provides a fully integrated all-in-one solution. Fully integrated all in one solution Arduino 2560-R3 compatible (works with Sprinter, Repetier, Marlin out of the box) (easy to change/flash fi...
This full graphic smart LCD controller comes with a large 128 x 64 LCD display with a SD card reader for untethered printing and onboard control. Contents of package: 128 x 64 LCD with SD card reader 8GB SDHC card (or, micro SDHC card with adapter)...
CNC Shield V3.0 features: Latest Arduino CNC Shield Version 3.0. GRBL 0.8c compatible.(Open source firmware that runs on an Arduino UNO that turns G-code commands into stepper signals) 4-Axis support(X, Y, Z , A-Can duplicate X,Y,Z or do a full 4th a...
mpn: 43217-146645, ean: 0603894528881,
Rumba is the core of a 3D printer, carver, laser cutter and other CNC 1.5pcs temperature sensor interface input; 2.All pins are drawn to facilitate more features to expand. 3.Servo expansion interface, easy to add automatic leveling function; 4.PW...
mpn: A4988, ean: 0699419859059,
Specifications: CNC Shield Board: Runs on 12-36V DC 2 x End stops for each axis (6 in total) 4-Axis support (X, Y, Z , A-Can duplicate X,Y,Z or do a full 4th axis with custom firmware using pins D12 and D13) compatible with engraving machines, 3D pri...
mpn: 2016009100, ean: 0705586405309,
Notice: ★MKS TFT32 do not support external power supply, can't work with Ramps1.4. ★The TFT doesn't support MPCNC at this time, we are upgrading the firmware★Please download and copy the firmware in a Windows computer, Apple computer will cau...
mpn: KINGPRINT-3D0411A005, ean: 0603894528935,
NOTE: 1. When energized, do not connect to the motherboard or replace the different module interfaces. 2. Pay attention to the Positive and negative of the wire. 3. Please check to determine whether the connection interface is correct, so as not to...