Login       My Wishlist
  My Cart
$0.00 / 0 items
 
3D Printing Supplies Outlet
3D Printers & Essential Supplies
 
International Access
Global Shipping Options Available
  Our Catalog   3D Printer Parts & Accessories

CCTREE 15PCS 3D Printer Heating Block Cotton with Kapton Tape Hotend Nozzle Heat Insulation Cotton for Ultimaker/Makerbot/Creality CR-10


Huge Savings Item! Save 14% on the CCTREE 15PCS 3D Printer Heating Block Cotton with Kapton Tape Hotend Nozzle Heat Insulation Cotton for Ultimaker/Makerbot/Creality CR-10 by CCTREE at 3D Printing Supplies Outlet. MPN: CC-COTTON-15. Hurry! Limited time offer. Offer valid only while supplies last. Specification Material: cotton Cotton Size: 70mm x 20mm x 2mm Kapton:Width 6mm, Lenght:33M Feature: heat preservation Note: this product only


Product Description

Specification
Material: cotton
Cotton Size: 70mm x 20mm x 2mm
Kapton:Width 6mm, Lenght:33M
Feature: heat preservation

Note: this product only suitable for 3D printer using indoors

Attention: Small parts, keep away from children

Package including:
15PCS x 2mm heating block cotton
1PCS x6mm Kapton Tape


WARNING!!
1.3D printer replacement parts, Always shut off power to the circuit before starting installation work.
2.The surface temperature of the 3D printer might be high, and be careful not to touch the heating element to prevent injury.
3.3D printer initial operation, Do not run the equipment Unattended state.
4.When printing with a PLA(190°C-230°C) or ABS(230°C-250°C)consumable, if the temperature sensor and other accessories fail, it may cause high temperature hazards. Do not run the equipment Unattended state.
5.To ensure the users will use the product safely and properly, Please read your 3D printer manual first and follow the instructions step by step before using the product.
6.Due to the variety of possible end-uses, it is ultimately the responsibility of the customer to determine a product's suitability for a particular application.

Features & Highlights

  • Heat preservation, keep the printer heating evenly and work better
  • You can Punch Holes or Cut fit size to the cotton.
  • Recommend Safe Working Temperature : <300°C
  • Cotton Size: 70mm x 20mm x 2mm Kapton:Width 6mm, Lenght:33M
  • Package including:15PCS x 2mm heating block cotton + 1PCS x 6mm Kapton Tape

Additional Information

Manufacturer:CCTREE
Brand:CCTREE
Model:CC-COTTON-15
Part Number:CC-COTTON-15
Publisher:CCTREE
Studio:CCTREE
MPN:CC-COTTON-15
UPC:724190093214
EAN:0724190093214
Package Weight:0.04 pounds
Package Size:3.9 x 0.5 x 0.5 inches

CCTREE 15PCS 3D Printer Heating Block Cotton with Kapton Tape Hotend Nozzle Heat Insulation Cotton for Ultimaker/Makerbot/Creality CR-10 by CCTREE

Buy Now:
CCTREE 15PCS 3D Printer Heating Block Cotton with Kapton Tape Hotend Nozzle Heat Insulation Cotton for Ultimaker/Makerbot/Creality CR-10

Brand: CCTREE
4.4 out of 5 stars with 49 reviews
Condition: New
Lead Time: 1 - 2 Business Days
Availability: In Stock
$14.99
$12.99
You Save: 13%


Quantity:  

 


 


Have questions about this item, or would like to inquire about a custom or bulk order?


If you have any questions about this product by CCTREE, contact us by completing and submitting the form below. If you are looking for a specif part number, please include it with your message.

First Name:
Last Last:
Email Address:
Your Message:

Related Best Sellers


Micro Swiss nozzle for MK10 All Metal Hotend Kit ONLY (Plated A2 Hardened Tool Steel)
By Micro-Swiss
mpn: M2558-04, ean: 7432114196172,
This is Micro Swiss MK10 All Metal Hotend ONLY style nozzle, it will ONLY fit our MK10 All Metal Hotend Kit. This nozzle has completely different internal dimensions to work with our Micro Swiss thermal barrier tube. It is made from a A2 Steel, heat ...

BIQU Upgrade Wear Resistant MK10 Nozzles M7 0.4mm Threaded Stainless Steel Nozzle Extrusion Head (Pack of 5pcs)
By BIQU
mpn: BIQU-3D0148, ean: 0608408773610,
Descriptions:Product Name: MK10 nozzle Material: high quality stainless steel Color: copper color Size: 13mm * 9mm Nozzle Accuracy: 0.4mm Screw outer diameter: 7mmPackage Included: 5*MK10 NozzleStandard 0.4 mm nozzle hole diameter. Highly recommended...

Micro Swiss CNC Machined Lever and Extruder Plate for Wanhao i3 (Full Kit)
By Micro-Swiss
mpn: M2570, ean: 7432114696696,
This is a replacement lever and extruder plate for Wanhao i3 and all of its clones. Lever and plate are CNC machined from 6061 billet aluminum, with weight reduction features. It will replace a stock plastic assembly that has tendency to warp over ti...

[Gulfcoast Robotics] 2 PCS MK10 Extruder Hotend Heater Block fits MP Maker Select Duplicator i3 3D Printer - Made by US company with quality and precision.
By Gulfcoast Robotics
mpn: BLKMK10M3_2, ean: 0719104610250,
This MK10 heater block version is for extruder with thermistor only, it has M3x0.5 tapped hole to accept M3 clamping screw with washer.If you are looking for FlashForge version of MK10 block with M4x0.7 tapped hole - please check ASIN B078JDHD4M Plea...

E3D All-metal v6 HotEnd Full Kit - 1.75mm Universal - Direct, 12v - Approximately 120mm PTFE (ASSEMBLY REQUIRED)
By E3D
mpn: MH5878263117250560,
The v6 HotEnd Full Kit from E3D has been redesigned for your convenience from the ground up! This new hot end contains the same signature high temperature performance for high-temp printing, as well as increased functionality for printing soft and fl...

AIKEER Teflon Tube, 3Pcs PTFE Teflon Tube (2 Meters) with 6Pcs PC4-M6 Fittings for 3D Printer 1.75mm Filament (2.0mm ID/4.0mm OD)
By AIKEER
mpn: IC015, ean: 0192187277952,
AIKEER Accessories Series Designed and Manufactured by AIKEER Only Specification of PTFE Teflon Tube Material: PTFE (Poly Tetra Fluoro Ethylene),Density: 2.15-2.20g/cm3 Heat resistance, up to 260℃ Outside Diameter: 4mm, Inside Diameter: 2mm Colo...

BuildTak 3D Printing Build Surface, 6.5" x 6.5" Square, Black (Pack of 3)
By BuildTak
mpn: BT65X65-3PK, ean: 0099461338722,
The Buildtak 3D-printing build surface is a 6.5" x 6.5" square sheet that adheres to a print bed of a fused-filament 3D printer (sold separately) to help the filament stick during printing, while also enabling clean removal of the printed part afterw...

Gizmo Dorks PEI Sheet 10" x 10" (254mm x 254mm) 1mm Thick 3D Printer Build Surface with 3M 468MP Adhesive, Made in The USA
By Gizmo Dorks
mpn: GD-POLYPEI-3M-10x10, ean: 0887503180831,
PEI (Polyetherimide) sheets provide a 3D printing build surface that requires no tape, slurry, or adhesive. ABS and PLA both stick extremely well to the surface, which eliminates the need for support rafts used for better adhesion. The printed 3D par...

Gizmo Dorks PEI Sheet 8" x 8" (203mm x 203mm) 1mm Thick 3D Printer Build Surface with 3M 468MP Adhesive, Made in The USA
By Gizmo Dorks
mpn: GD-POLYPEI-3M-8x8, ean: 0887503180824,
PEI (Polyetherimide) sheets provide a 3D printing build surface that requires no tape, slurry, or adhesive. ABS and PLA both stick extremely well to the surface, which eliminates the need for support rafts used for better adhesion. The printed 3D par...

Micro Swiss MK10 All Metal Hotend Kit .4mm Nozzle WANHAO, FlashForge, Dremel Idea Builder
By Micro-Swiss
mpn: M2559-04, ean: 0866086000200,
This is an all metal hotend upgrade kit for MK10 Extruders. All metal hotend will let you print at much higher temperature than possible with original PTFE lined one. Another benefit of an all metal hotend design is more consistent melt chamber contr...



Privacy Policy / Terms of Service
© 2019 - metalbot.org. All Rights Reserved.