fosa MKS-Base V 1.5 Motherboard & 12864 LCD Controller Panel Kit for 3D Printer, 3D Printer Replacement V1.5 12V - 24V Control Board Mainboard Mother Board Module Replace Parts
fosa MKS-Base V 1.5 Motherboard & 12864 LCD Controller Panel Kit for 3D Printer, 3D Printer Replacement V1.5 12V - 24V Control Board Mainboard Mother Board Module Replace Parts by fosa at 3D Printing Supplies Outlet. MPN: fosam9gybeozuf. Hurry! Limited time offer. Offer valid only while supplies last. Specifications: Support Power Input: 12-24V Material: FR2 Color: As Pictures Show Board Size: Approx. 11 * 9cm / 4.3 * 3.5in LCD Size: Approx. 9.5 *
Support Power Input: 12-24V
Color: As Pictures Show
Board Size: Approx. 11 * 9cm / 4.3 * 3.5in
LCD Size: Approx. 9.5 * 9.5cm / 3.7 * 3.7in
Weight: Approx. 234g
1 x MKS BASE V1.5
1 x 12864 LCD
2 x Ribbon Cable
1 x USB Cable
1 x Connector
Features & Highlights
- All the functions are integrated on the board, which avoids the problem of complicated connectors and malfunctioning
- Use 4982 motor driver, SOP packaging, better heat dissipation
- 4 layers PCB, optimize heat dissipation performance, Support 24V input, the heated bed current can be reduced to 1/4 at the same system power which effectively resolves the heating problem of heat bed MOS tube.
- Adopt high quality MOSFET tube, better heat dissipation and working stability, Can connect board for Ramps1.4, conect 2004 LCD or 12864 LCD controller board directly. Add 2 fan interfaces.
- Use special power supply chip, support 12V-24V power input, solve the problem of heating and power supply shortage for Ramps voltage conversion chip
|Item Weight:||0.51 pounds|
|Item Size:||5.51 x 2.36 x 2.36 inches|
Have questions about this item, or would like to inquire about a custom or bulk order?
If you have any questions about this product by fosa, contact us by completing and submitting the form below. If you are looking for a specif part number, please include it with your message.
Related Best Sellers
Mainboard Specifications: Brand: Anet Type: E10 mainboard Suitable for: Anet A8 3D Printer Voltage Input: 12V Motherboard Features: 1. Highly integrated one board, to solve the Ramps1.4 modular interface cumbersome, easy to trouble the problem. 2. O...
mpn: 43237-2, ean: 0686603768792,
►Product Specifications: - 2-Phase motor can control the forward and reverse rotation - With 1-2, w1-2, 2W1-2, 4W1-2 phase excitation mode. - Only the clock pulse signal can be driven two-phase bipolar stepper motors to achieve low vibration, high ...
Specifications:Flat Width: 70mm/2.76-inchRated Voltage:300VShrinkable Temperature:80CTemperature Range: -40C to +105CShrinking Rate: 48%(cross section)and 5%(longitudinal)Length: 5M/196.85-inchColor: ClearFeatures:Heating Tool: Hot Air GunThis heat s...
Overview This full graphic Smart Controller contains a SD-Card reader, an rotary encoder and a 128 x 64 dot matrix LCD display. You can easy connect it to your Ramps board using the "smart adapter" included. After connecting this panel to your Ramp...
mpn: 17HS15-0406S, ean: 0701056339488,
This hybrid unipolar stepper motor with 1.8 deg. step angle (200 steps/revolution). Each phase draws 400mA at 12V, allowing for a holding torque of 26Ncm(37oz.in). Electrical Specification: * Manufacturer Part Number: 17HS15-0406S * Motor Type: U...
mpn: GT2560, ean: 0721968003383,
Features: 1. Space-saving with compacted volume. 2. Integrated peripherals ensure much more stable connection. 3. Added heat sink provide better heat dissipation for MOSFET. 4. Separate control for fan and extruder. 5. Support LCD2004 and LCD128...
mpn: LW-DZ-000092, ean: 6930864921576,
Size: 11.5cm x 3cm. Package include:1x 3D Printer Controller boardSuit for 5 Pololu stepper driver plate. Integrated 5A extra safety and components protection.. With heater output/three thermistor MOSFET.. Servo connector used to connect end dog, mot...
mpn: TE887, ean: 4894623742081,
Features: 2560 and Ramps 1.4 are integrated in the board, which avoids the complicated connectors. Support a variety of stepper drivers such as A4988, DRV8825, TMC2100 and LV8729, available to change the stepper drivers and motors as users like. Rese...
mpn: BIQU-ZZB000164+ZZB000069+K202+L102, ean: 0711176310410,
Specification: 2004LCD: >Using a large screen 2004LCD(3.2'), it can support 8 GB >With a SD card base on back, put slicing file into the SD card and select the file on the LCD, then can be printing >Product comes encoder parameter adjustment can be ...
mpn: NV21L1174NJFV9Z, ean: 0191599837167,
DescripitonThis item is a silicone protective case for MK7/MK8/MK9 aluminum heater block. It is a great accessory for 3D printer.Features- Color: Coffee- Material: Silicone- Size: 2x2x1cm- Made from premium silicone, it is flexible and stretchy.- Pro...