GOOAnn New Upgraded 3D Pen, 3D Printing Pen Compatible with 1.75mm Low Temperature PCL filament, 3D Doodle Drawing Pen, No Clog, 3D Art Crafts DIY or Education Creation Printer Pen for Kids (Blue)
Super Savings Item! Save 37% on the GOOAnn New Upgraded 3D Pen, 3D Printing Pen Compatible with 1.75mm Low Temperature PCL filament, 3D Doodle Drawing Pen, No Clog, 3D Art Crafts DIY or Education Creation Printer Pen for Kids (Blue) by GOOAnn at 3D Printing Supplies Outlet. MPN: 3DPT4S. Hurry! Limited time offer. Offer valid only while supplies last. The 3D printing pen is perfect for kids and creative lovers over the age of 6. And kids who under 6 years old, please use it with adult
How to use?
1.Connected the 3D pen's power whose output power is 5V 2A, the power indicator turns YELLOW.
2.Press the filament enter button, the heating indicator turns RED. The pen begins to heat up.
3.The heating indicator will turn GREEN after it finish heating up. Then double press the filament enter button, you'll hear the motor keep running and then insert the PCL filament to the inport.You can do 3D printing when the filament extrudes from the outlet.
4.Press the filament return button , it will stop working. Then press it again, the filament automatically pull out from the inport/outport.
5.Please ensure the filament loading part smooth,whether loading or replace filament when doing 3D drawing.
Please seriously read the instruction before use, especially for the beginners.
DO use the PCL filament, but not ABS/PLA filament, avoiding damage to the pen.
DO NOT touch the nozzle, the outlet or heat dissipation area during use.
Please unload the filament after use and turn off the power.
WHY CHOOSE OUR 3D PRINTING PEN?
1.PCL filament is low temperature printing filament. Even though it is much expensive than PLA and ABS, it's more safe. For kids, PLEASE DO choose low temperature 3D printing pen.
2.Our new 2018 upgraded 3D pen has intelligent sleep mode, which means the pen will automatically sleep after 2 minutes without working to extend the life of the pen.
3.The PCL filament is non-toxic,odorless when working.
Filament Type: PCL
Working Voltage: 5V 2A
Pen Weight: 1.4 oz (40g)
1 x 3D printing pen
1 x USB cable
1 x Power adapter
2 x PCL Filament with Random Color（16 feet）
1 x Instruction manual guide
Features & Highlights
- LOW TEMPERATURE PRINTING. It's a new upgrade 3D printing pen. The working temperature of the pen's body is 70℃, and the temperature of the pen's tip is 40℃ which is close to our human normal temperature. But for safety, it's advisable to touch it after several minutes, after all it still has some temperature. For kids, please choose low temperature 3D printing pen.
- COMPATIBLE WITH PCL FILAMENT. This is a new type of environmentally friendly biodegradable materials made from renewable plant resources. Unlike PLA/ABS filament, PCL filament will not create pungent odor when infused into 3D pen, it's more healthy for kids .
- LIGHT AND THIN. The net weight of the 3D pen is only 40g, and the diameter of the pen's body where being held is 0.59 inch, which is much easier for kids to hold and use it.
- LOW TEMPERATURE 3D PEN takes MORE SAFETY. The melting points are up to 190 ℃ when using normal 3D pen with PLA/ABS filament. There might be high risks of burning or serious injury on skin or eyes. But the 3D pen with PCL filament has low melting point at only 70℃, which is very safe for kids.
- AUTOMATIC SLEEP MODE. The 3D pen will enter to automatic sleep mode to protect the device itself when it stop working for 2 minutes.
|Package Weight:||0.38 pounds|
|Package Size:||4.53 x 1.34 x 1.34 inches|