Login       My Wishlist
  My Cart
$0.00 / 0 items
 
3D Printing Supplies Outlet
3D Printers & Essential Supplies
 
International Access
Global Shipping Options Available
  Our Catalog   3D Printer Parts & Accessories   3D Printer Interface & Driver Modules

Hot Bed Module, FYSETC Add-on Heat Bed Power Module Expansion Board High Current Load Module Mosfet Tube for 3D Printer - Pack of 2


Hot Bed Module, FYSETC Add-on Heat Bed Power Module Expansion Board High Current Load Module Mosfet Tube for 3D Printer - Pack of 2 by FYSETC at 3D Printing Supplies Outlet. MPN: 2 Snow Mos. Hurry! Limited time offer. Offer valid only while supplies last. What is Mosfet Module? 1. If you intend to use heated bed with your 3D printer that uses a 12V power supply, then this module is recommended, else it


Product Description

What is Mosfet Module?
1. If you intend to use heated bed with your 3D printer that uses a 12V power supply, then this module is recommended, else it may cause excessive current during times which may burn the connectors on the controller board.
2. Another saying, If you need anything greater or equal to 15A this module is a must! For example, if your total power usage is 240W and you have 12V power supply, then it means at least 20A current is needed (20X12=240W). As ChiTu controller board is only capable of 15A this setting will not work. To make it work, you need this extra power module.
3. With this addon module to your 3D printer motherboard you can lead the maximum current up to 25A.

Feature:
Dimensions(LxWxH): 7 x 4.5 x 3 cm/ 2.7" x 1.8" x 1.2"
Power Supply: 12V-50V (12-24VDC recommended)
This module is based on power Mosfet and will allow PID control of the heated bed (DC-DC Relays usually do not allow this)

Package Included:
2 x Heated Bed Power Module
2 x Connection cable for input signal
4 x Power Connection Cables;
4 x Heat Bed Power Connection Cables

Features & Highlights

  • Heat bed Mosfet, when the heated bed power is too large, it completely solve the hot bed power is too large and the load current issue; with this add-on module to board lead the maximum current up to 25A.
  • The Heat Bed Power Module can be used in both Chitu/Lerdge motherboard, and other open 3D Printer motherboards.
  • Upgrade Mosfet: With unique snowflake heatsink design, wire is 14AWG and 30-60 cm length, it has a great cooling effect.
  • Please Kindly Note: under the premise of normal cooling, it work stable under I(Max)=25A, so we suggest the current must not exceed 25A while the process working.
  • After Sale-Guarantee: Each one has done functional test before shipment, anyone receives a defective one please contact us,we will give you support within 24 hours.

Additional Information

Manufacturer:Fuyuansheng
Brand:FYSETC
Color:2 Pack Snow Module
Part Number:2 Snow Mos
Publisher:Fuyuansheng
Studio:Fuyuansheng
MPN:2 Snow Mos
UPC:711102059840
EAN:0711102059840
Package Weight:2.03 pounds
Package Size:5.51 x 1.38 x 1.38 inches

Hot Bed Module, FYSETC Add-on Heat Bed Power Module Expansion Board High Current Load Module Mosfet Tube for 3D Printer - Pack of 2 by FYSETC

Buy Now:
Hot Bed Module, FYSETC Add-on Heat Bed Power Module Expansion Board High Current Load Module Mosfet Tube for 3D Printer - Pack of 2

Brand: FYSETC
4.5 out of 5 stars with 201 reviews
Condition: New
Lead Time: 1 - 2 Business Days
Availability: In Stock
$14.99


Quantity:  

 


 


Have questions about this item, or would like to inquire about a custom or bulk order?


If you have any questions about this product by FYSETC, contact us by completing and submitting the form below. If you are looking for a specif part number, please include it with your message.

First Name:
Last Last:
Email Address:
Your Message:

Related Best Sellers


CNC Shield Expansion Board,CNC Shield Expansion Board+4Pcs A4988 Stepper Motor Driver For Engraver 3D Printer
By Hilitand
mpn: Hilitandiqyt9ha74g, ean: 0763741052379,
Features: Use removable A4988 or DRV8825 compatible stepping driver. The extension board can be used for engraving machine or 3D printer driver. Compatible with GRBL 0.8. Open-source firmware operated on UNO, converting G code command into stepping s...

Alloet 3D Printer TMC2130 Stepstick Stepper Motor Driver Module+ Heat Sink
By Alloet
mpn: 164946, ean: 0725370727875,
Features: 1. 1.2A two-phase stepper motor single-phase current (peak 2.5A); adjustable motor operating current; 2. Support two control methods: Step / DIR interface and SPI interface control 3. Motor input voltage range: 4.75 ~ 46V 4. Logical interfa...

Gowoops CNC Shield V3 Expansion Board + 4PCS A4988 Step Motor Driver with Heatsinks for Arduino 3D Printer
By Gowoops
mpn: ZZDBAD2002, ean: 0705586404937,
Arduino CNC Shield V3.0 Installation Guide: http://osoyoo.com/?p=4783 CNC Shield Board: (Learn more information pls go to ASIN: B0157ZZ28M) GRBL 0.9 compatible. (Open source firmware that runs on an Arduino UNO that turns G-code commands into stepper...

BALITENSEN StepStick DRV8825 Stepper Motor Driver Module Carrier for RAMPS1.4 Board RepRap 3D printer with Heat Sink 5pcs
By BALITENSEN
mpn: YDP25, ean: 0786391186652,
The DRV8825 stepper motor driver carrier is a breakout board for TI's DRV8825 microstepping bipolar stepper motor driver. The module has a pinout and interface that are nearly identical to those of our A4988 stepper motor driver board, so it can be...

Ywillink 3D Printer Parts LCD 2560x1440 2K Drive Board Plate Light Curing Display for PC Raspberry Pie
By Ywillink
ean: 7435698353733,
LCD Screen Specification:Size:5.5 inchResolution: 2560x1440Pixel precision: 47.25umDisplay area: 68.04x120.96mmSize:70.94 x 128.49 x 1.45mmRatio: 9:16Interface: MipiDrive Board Specification:HDMI to MIPIUSB 5V power supply, supporting 2K resolutionSu...

EEEKit TMC2208 Stepstick Stepper Motor Driver Module Board, with Heat Sink for 3D Printer
By EEEKit
mpn: 104381, ean: 0750958542878,
Product Description Package Includes: 1 x TMC2208 Driver. 1 x Heat Sink. 1 x Screwdriver. Please note that EEEKit and Amazon.com are the only sellers on Amazon that are authorized to sell products with the EEEKit name. Buy from sellers EEEKit or Ama...

Eiechip CNC 3D Printer Kit for Arduino Mega 2560 R3 + RAMPS 1.4 Controller + LCD 2004 + 6X Limit Switch Endstop + 5 A4988 Stepper Driver
By Eiechip
mpn: CNC 3D Printer Kit, ean: 0669591129219,
CNC Shield Board: 1>PWM Spindle and direction pins 2>4-Axis support (X, Y, Z , A-Can duplicate X,Y,Z or do a full 4th axis with custom firmware using pins D12 and D13) 3>2 x End stops for each axis (6 in total) 4>Coolant enable 5>Uses removable A4988...

WINSINN 3D Printer V6 Extruder Nozzle .4mm Copper Brass + Aluminum Heater Block + Heatbreak Bore 4.2mm Throat Heat Break - For E3D V6 J-Head Hotend 1.75mm Filament RepRap Bowden (Pack of 15Pcs)
By WINSINN
mpn: V6PZJRKTKGH, ean: 0686603768693,
►Nozzle Material: High quality Copper►Heatbreak Material: Stainless steel►Heater Block Material: Aluminum alloy►Nozzle size: 0.4mm►Heatbreak size: M7, Bore 4.2mm►Nozzle Ensure Concentricity and Roundness. ►Support: E3D V6 J-Head Hotend ...

KINGPRINT TL-Smoother Addon Module Filter Module 3D Printer Motor Driver (Pack of 3pcs)
By KINGPRINT
mpn: KINGPRINT-ZMK000003B, ean: 0603894529581,
Specification: The board provides flyback diodes (freewheeling diodes) for the motor outputs, so that they are also protected against induction voltages in the unpowered state of the driver. You will get smoother movement especially on the delta-styl...

TL Smoother Addon Module for Pattern Elimination Motor Clipping Filter 3D Printer Stepper Motor Drivers (3 PCS)
By KOLODO
mpn: 43237-2, ean: 0745844613138,
Specification: The board provides flyback diodes (freewheeling diodes) for the motor outputs, so that they are also protected against induction voltages in the unpowered state of the driver. You will get smoother movement especially on the delta-styl...



Privacy Policy / Terms of Service
© 2019 - metalbot.org. All Rights Reserved.