KINGPRINT Ramps 1.6 Expansion Control Panel with Heatsink Upgraded Ramps 1.4/1.5 for 3D Printer Board
Huge Savings Item! Save 19% on the KINGPRINT Ramps 1.6 Expansion Control Panel with Heatsink Upgraded Ramps 1.4/1.5 for 3D Printer Board by KINGPRINT at 3D Printing Supplies Outlet. MPN: KINGPRINT-ZZB000164A. Hurry! Limited time offer. Offer valid only while supplies last. Product features1. Supports up to 5 motor drivers with the standard A4988 / DRV8825 Pololu interface 2. Simple and convenient Connection, larger
Have questions about this item, or would like to inquire about a custom or bulk order?
If you have any questions about this product by KINGPRINT, contact us by completing and submitting the form below. If you are looking for a specif part number, please include it with your message.
Related Best Sellers
mpn: KINGPRINT-3D0343A01, ean: 0603894529284,
Specification: Weight: 91g 1. Support for power continued to fight, to save power. 2. Support blanking detection. 3. The boot logo and all buttons can design their own interfaces. 4. Increase the custom function button. 5. Support full English inter...
mpn: 43217-33003, ean: 0603894529390,
Specification: Can be connected to the control panel and 12864LCD Ramps1.4,2004LCD control panel.(Can't be sure to match all of stype of 12864LCD and 2004LCD ) MEGA2560 and RAMPS 1.4 set on a board, to solve complicated RAMPS1.4 combination of inter...
Difference between 2016 and 2017 Version 2016 Old MOSFET IC Model : PDF55N06 VDSS:60V ID:55A 2017 New MOSFET IC model: HM60N06 VDSS:60VID:60A, more durable and safety. Product Features: 1) Mega 2560 R3 2) 3D Printer Controller RAMPS 1.4 with high-qu...
mpn: 43188-328351, ean: 0603894528874,
-Could be connected to touch-screen MKS TFT28. -Good to work with 12864LCD and MKS TFT touch screen. -Net Weight:130g -Dimensions:146.5*95mm Note: Pls confirm whether the positive and negative reversed before powering up again, if the user is due ...
CNC Shield Board: Latest CNC Shield Version 3.0 for arduino GRBL 0.9 compatible 4-Axis support (X, Y, Z , A-Can duplicate X,Y,Z or do a full 4th axis with custom firmware using pins D12 and D13) 2 x End stops for each axis Coolant enable Compatible ...
mpn: BIQU-3D0465, ean: 0711176311042,
Package List: 3x TL-Smoother Addon Module 3xUSB CableThe TL-Smoother is an addon module for 3D printer stepper motor drivers. The board provides flyback diodes (freewheeling diodes) for the motor outputs, so that they are also protected against induc...
mpn: 43217-13352, ean: 0603894529024,
-Can accept 24V input power under the same system can be hot-bed current is reduced to 1/4, an effective solution to the hot bed MOS pipe heat problems. -Tthe firmware can use open source firmware Marlin, ramps1.4 identical configuration and can dir...
mpn: 43237-2, ean: 0705701562658,
Fahrenheit and Celsius Display Can Be Choose Temperature Calibrating, Refrigerating control output delay protection Control the Temperature by Setting the Temperature Set Value and the Difference Value Alarm When Temperature Exceeds the Limit or When...
mpn: KINGPRINT-L101A01, ean: 0603894529512,
12864LCD- Suitable for copiers, fax machines, laser printers, industrial test equipment, networking equipment etc. LCD control panel through which you can achieve spooling is the 3D model Gcode files are copied to the SD card, and then print the file...
mpn: 3d, ean: 0701948408902,
3D printer Kit guide: http://osoyoo.com/driver/3D%20printer%20instructions.pdf Caution: 1) The max power supply for these ramps is 12V and the max watts is about 180W. The max watts for the hotbed is about 100W and the max temperature is just 50 de...