Login       My Wishlist
  My Cart
$0.00 / 0 items
 
3D Printing Supplies Outlet
3D Printers & Essential Supplies
 
International Access
Global Shipping Options Available
  Our Catalog   3D Printer Parts & Accessories   3D Printer Controllers

Quimat Arduino CNC Shield Contoller Kits for 3D Printer,CNC Shield V3.0 + UNO R3 Board + Nema 17 Stepper Motor + A4988 Stepper Motor Driver + Heat Sinks,Perfectly Compatible with GRBL


Free Shipping Included! Quimat Arduino CNC Shield Contoller Kits for 3D Printer,CNC Shield V3.0 + UNO R3 Board + Nema 17 Stepper Motor + A4988 Stepper Motor Driver + Heat Sinks,Perfectly Compatible with GRBL by Quimat at 3D Printing Supplies Outlet. MPN: QD06C. Hurry! Limited time offer. Offer valid only while supplies last. CNC Shield V3.0 features: Latest Arduino CNC Shield Version 3.0. GRBL 0.8c compatible.(Open source firmware that runs on an Arduino UNO that turns


Product Description

CNC Shield V3.0 features:
Latest Arduino CNC Shield Version 3.0.
GRBL 0.8c compatible.(Open source firmware that runs on an Arduino UNO that turns G-code commands into stepper signals)
4-Axis support(X, Y, Z , A-Can duplicate X,Y,Z or do a full 4th axis with custom firmware using pins D12 and D13)
2 x End stops for each axis(6 in total), Spindle enable and direction Coolant enable

Stepper drivers
Uses removable Pololu A4988 compatible stepper drivers.
Jumpers to set the Micro-Stepping for the stepper drivers.

Compact design.
Stepper Motors can be connected with 4 pin molex connectors or soldered in place.
Runs on 12-36V DC. (At the moment only the Pololu DRV8825 drivers can handle up to 36V so please consider the operation voltage when powering the board.)

Stepping Motor
The most popular Nema 17 model with 1.8 deg. step angle (200 steps/revolution)
0.4A rated current/phase, allowing for a holding torque of 26Ncm(36.8oz.in)
Connection:Black(A+), Green(A-), Red(B+), Blue(B-)

Stepping Motor Specification:
* Cable length: 11.8 inches
* Phase Resistance: 30ohms
* Inductance: 37mH+/-20%(1KHz)
* Frame Size: 42 x 42mm
* Body Length: 34mm
* Shaft Diameter: 5mm
* Front Shaft Length: 20mm
* D-cut Length: 15mm
* Number of Leads: 4
* Lead Length: 300mm
* Weight: 230g

Kit list:
1x CNC Shield V3.0
1x Keyestudio UNO R3 board
4x A4988 driver
1x USB cable
1x Nema 17 stepping motor

Features & Highlights

  • CNC Shield V3.0 Features - Latest Version 3.0, GRBL 0.8c compatible, 4 Axis supported and 2 end stops for each axis.
  • Compact design - Stepper motors can be connected with 4 pin molex connectors or soldered in place.
  • Stepper Drivers - Uses removable Pololu A4988 compatible stepper drivers, jumpers to set the Micro-Stepping for the stepper drivers
  • Stepping Motor Included - Nema 17 model, holding torque of 26Ncm(36.8oz.in), 12V/0.4A and 1.8 deg.step angle(200 steps/rev)
  • Technical support - Our technical support team is on standby to provide solutions to your questions, please feel free to contact us.

Additional Information

Manufacturer:Quimat
Brand:Quimat
Part Number:QD06C
Publisher:Quimat
Studio:Quimat
MPN:QD06C
Package Weight:0.85 pounds
Package Size:4.69 x 3.39 x 3.39 inches

Quimat Arduino CNC Shield Contoller Kits for 3D Printer,CNC Shield V3.0 + UNO R3 Board + Nema 17 Stepper Motor + A4988 Stepper Motor Driver + Heat Sinks,Perfectly Compatible with GRBL by Quimat

Buy Now:
Quimat Arduino CNC Shield Contoller Kits for 3D Printer,CNC Shield V3.0 + UNO R3 Board + Nema 17 Stepper Motor + A4988 Stepper Motor Driver + Heat Sinks,Perfectly Compatible with GRBL

Brand: Quimat
4.2 out of 5 stars with 224 reviews
Condition: New
Lead Time: 1 - 2 Business Days
Availability: In Stock
$26.99


Quantity:  

 


 


Have questions about this item, or would like to inquire about a custom or bulk order?


If you have any questions about this product by Quimat, contact us by completing and submitting the form below. If you are looking for a specif part number, please include it with your message.

First Name:
Last Last:
Email Address:
Your Message:

Related Best Sellers


KINGPRINT Rumba 3D Printer Control Board with USB Cable for 3D Printer
By BIQU
mpn: 43217-146645, ean: 0603894528881,
Rumba is the core of a 3D printer, carver, laser cutter and other CNC 1.5pcs temperature sensor interface input; 2.All pins are drawn to facilitate more features to expand. 3.Servo expansion interface, easy to add automatic leveling function; 4.PW...

HONG111 CNC Shield Expansion Board with A4988 Stepper Motor Driver Modules and Heat Sink, for Arduino V3 Engraver
By HONG111
mpn: A4988, ean: 0699419859059,
Specifications: CNC Shield Board: Runs on 12-36V DC 2 x End stops for each axis (6 in total) 4-Axis support (X, Y, Z , A-Can duplicate X,Y,Z or do a full 4th axis with custom firmware using pins D12 and D13) compatible with engraving machines, 3D pri...

Gowoops 3D Printer Controller LCD Touch Screen Board, MKS TFT32 3.2'' LCD Display, Suitable for MKS BASE SBASE GEN MINI Board, Cannot Work with Ramps 1.4 and MPCNC
By Gowoops
mpn: 2016009100, ean: 0705586405309,
Notice: ★MKS TFT32 do not support external power supply, can't work with Ramps1.4. ★The TFT doesn't support MPCNC at this time, we are upgrading the firmware★Please download and copy the firmware in a Windows computer, Apple computer will cau...

KINGPRINT KFB2.0 Controller Board for Reprap Mendel Prusa I3 Kossel 3D Printer
By KINGPRINT
mpn: KINGPRINT-3D0411A005, ean: 0603894528935,
NOTE: 1. When energized, do not connect to the motherboard or replace the different module interfaces. 2. Pay attention to the Positive and negative of the wire. 3. Please check to determine whether the connection interface is correct, so as not to...

Printer 3D Stepper Motor Driver, FYSETC TMC2208 Stepstick Stepper Motor Driver Module Carrier with Heat Sink Screwdriver for 3D Printer Controller Boards Ramps1.4 MKS Gen, Black 5 Pcs
By FYSETC
mpn: TMC2208 Black, ean: 0711102060150,
Specifications: ●MicrIsteps: 256 segments ●Model: Stepper Motor Driver TMC2208 ●Drive current: 1.4A ●Peak current: 2A ●Voltage range: 4.75V-36VSize: TMC2208 (LWH): 20 x 15 x 11 mm/ 0.78" x 0.59 x 0.43 Heat Sink (LWH): 9 x 9 x 12 mm/ 0.35" ...

KINGPRINT CNC Shield V3.0 Expansion Board for Arduino with 4pcs A4988 Stepper Motor Driver with Heatsink kits for Arduino
By KINGPRINT
mpn: KINGPRINT-VVV001291A, ean: 0603894529666,
CNC Shield Board: > Open source firmware that runs on an UNO for Arduino that turns G-code commands into stepper signals > Jumpers to set the Micro-Stepping for the stepper drivers. (Some drivers like the DRV8825 can do up to 1/32 micro-stepping) A49...

HESAI 3D Printer Kit Smart Parts RAMPS 1.4 Controller Control Panel LCD 2004 Module Display Monitor Motherboard Blue Screen
By HESAI
mpn: A126-3D2004, ean: 0732240562542,
Description:The intelligent controller includes an SD card reader, rotary encoders and a 20-character × 4 line LCD display. You can easily connect it to your RAMPS 1.4 board using "smart adapter" included. This panel connect your RAMPS 1.4, you do n...

BIQU Mega2560 Control Board + LCD 12864 Graphic Smart Display Controller Module + Ramps 1.6 Mega Shield+A4988 Stepstick Stepper Motor Driver with Heat Sink for 3D Printer Arduino Reprap
By BIQU
mpn: BIQU-ZZB000164+ZZB000069+K203+L101, ean: 0711176310441,
Specification: 12864LCD: >Using a large screen 12864LCD(3.2'), it can support 8 GB >With a SD card base on back, put slicing file into the SD card and select the file on the LCD, then can be printing >Product comes encoder parameter adjustment can be...

KINGPRINT 3D Controller Board MKS BASE V1.4 RepRap Ramps 1.4 for 3D Printer
By KINGPRINT
mpn: 43188-488541, ean: 0603894529642,
Specification: -MKS BASE is a feature rich all-in-one electronics solution for Reprap and other CNC devices. -It features an onboard ATmega2560. Its five motor outputs are powered by A4982 stepper drivers. -The board can use the same firmware as Ra...

BIQU KFB3.0 3D Control Board +LCD 2004 Module Display Monitor Motherboard + A4988 Stepstick Stepper Motor Driver Module for Reparp Mendel Prusa I3 Kossel 3D Printer
By BIQU
ean: 0711176310496,
Specification: Size: 10mm*10mm Power Input: 12V ~ 40V Support for Motor Drive Type: A4988, DRV8825, TMC2100 Support Control Screen: LCD2004, LCD12864. LCD1602, touch color screen Compile Environment: Arduino IDE firmware: Marlin Net Weight: 105g/pcs ...



Privacy Policy / Terms of Service
© 2019 - metalbot.org. All Rights Reserved.