ReliaBot Hot Bed Power Expansion Board Heating Controller MOSFET High Current Load Module Over 30A 12V or 24V for 3D Printer
Mega Sale! Save 28% on the ReliaBot Hot Bed Power Expansion Board Heating Controller MOSFET High Current Load Module Over 30A 12V or 24V for 3D Printer by ReliaBot at 3D Printing Supplies Outlet. MPN: RD005. Hurry! Limited time offer. Offer valid only while supplies last. Packing list: 1 * Heating Controller (12V / 24V , Over 30A) for 3D Printer Hotbed 1 * 30cm signal cable for
Have questions about this item, or would like to inquire about a custom or bulk order?
If you have any questions about this product by ReliaBot, contact us by completing and submitting the form below. If you are looking for a specif part number, please include it with your message.
Related Best Sellers
mpn: Silent Device, ean: 0711102060051,
Apply to 3D printer kossel Rostock Duplicator Pursa i3 Ultimaker Lulzbot Tevo CR-10 and others, this product mainly protects the stepper motor drive, especially the DRV8825 TMC2100 TMC2130 TMC2208 drive! ! When using the drive inserted in the device ...
The RUMBA (R.eprap U.niversal M.ega B.oard) control board provides a fully integrated all-in-one solution. Fully integrated all in one solution Arduino 2560-R3 compatible (works with Sprinter, Repetier, Marlin out of the box) (easy to change/flash fi...
This full graphic smart LCD controller comes with a large 128 x 64 LCD display with a SD card reader for untethered printing and onboard control. Contents of package: 128 x 64 LCD with SD card reader 8GB SDHC card (or, micro SDHC card with adapter)...
CNC Shield V3.0 features: Latest Arduino CNC Shield Version 3.0. GRBL 0.8c compatible.(Open source firmware that runs on an Arduino UNO that turns G-code commands into stepper signals) 4-Axis support(X, Y, Z , A-Can duplicate X,Y,Z or do a full 4th a...
mpn: 43217-146645, ean: 0603894528881,
Rumba is the core of a 3D printer, carver, laser cutter and other CNC 1.5pcs temperature sensor interface input; 2.All pins are drawn to facilitate more features to expand. 3.Servo expansion interface, easy to add automatic leveling function; 4.PW...
mpn: A4988, ean: 0699419859059,
Specifications: CNC Shield Board: Runs on 12-36V DC 2 x End stops for each axis (6 in total) 4-Axis support (X, Y, Z , A-Can duplicate X,Y,Z or do a full 4th axis with custom firmware using pins D12 and D13) compatible with engraving machines, 3D pri...
mpn: 2016009100, ean: 0705586405309,
Notice: ★MKS TFT32 do not support external power supply, can't work with Ramps1.4. ★The TFT doesn't support MPCNC at this time, we are upgrading the firmware★Please download and copy the firmware in a Windows computer, Apple computer will c...
mpn: KINGPRINT-3D0411A005, ean: 0603894528935,
NOTE: 1. When energized, do not connect to the motherboard or replace the different module interfaces. 2. Pay attention to the Positive and negative of the wire. 3. Please check to determine whether the connection interface is correct, so as not to...
mpn: TMC2208 Black, ean: 0711102060150,
Specifications: ●MicrIsteps: 256 segments ●Model: Stepper Motor Driver TMC2208 ●Drive current: 1.4A ●Peak current: 2A ●Voltage range: 4.75V-36VSize: TMC2208 (LWH): 20 x 15 x 11 mm/ 0.78" x 0.59 x 0.43 Heat Sink (LWH): 9 x 9 x 12 mm/ 0.35" ...
mpn: KINGPRINT-VVV001291A, ean: 0603894529666,
CNC Shield Board: > Open source firmware that runs on an UNO for Arduino that turns G-code commands into stepper signals > Jumpers to set the Micro-Stepping for the stepper drivers. (Some drivers like the DRV8825 can do up to 1/32 micro-stepping) A49...