Login       My Wishlist
  My Cart
$0.00 / 0 items
 
3D Printing Supplies Outlet
3D Printers & Essential Supplies
 
International Access
Global Shipping Options Available
  Our Catalog   3D Printer Parts & Accessories   3D Printer Controllers

SainSmart 3D Printer controller 3D Printer Control Board Ramps 1.4 for Reprap Mendel Prusa Arduino Mega2560 Mega1280


SainSmart 3D Printer controller 3D Printer Control Board Ramps 1.4 for Reprap Mendel Prusa Arduino Mega2560 Mega1280 by SainSmart at 3D Printing Supplies Outlet. MPN: 101-91-100. Hurry! Limited time offer. Offer valid only while supplies last. Overview : It is designed to fit the entire electronics needed for a RepRap in one small package for low cost. RAMPS interfaces an Sainsmart Mega


Product Description

Overview : It is designed to fit the entire electronics needed for a RepRap in one small package for low cost. RAMPS interfaces an Sainsmart Mega with the powerful Sainsmart MEGA platform and has plenty room for expansion. The modular design includes plug in stepper drivers and extruder control electronics on an Sainsmart MEGA shield for easy service, part replacement, upgrade-ability and expansion. Additionally, a number of Sainsmart expansion boards can be added to the system as long as the main RAMPS board is kept to the top of the stack. Version 1.4 uses surface mount capacitors and resistors to further cover edge issue cases. As of version 1.3 in order to fit more stuff RAMPS is no longer designed for easy circuit home etching. If you want to etch your own PCB either get version 1.25 or Generation_7_Electronics. Version 1.25 and earlier are "1.5 layer" designed boards (i.e. it"s double sided board, but one of layers can easily be replaced with wire-jumpers) that is printable on your RepRap with the etch resist pen method, or home fabbed with toner transfer. This board is mostly based on Adrian"s Pololu_Electronics and work by Tonok. Copper etch resists methods suggested by Vik. Also inspired by Vik"s work with EasyDrivers. circuit design based mostly on Adrian"s Pololu_Electronics Joaz at RepRapSource.com supplied initial pin definitions and many design improvements. Much inspiration, suggestions, and ideas from Prusajr, Kliment, Maxbots, Rick, and many others in the RepRap community. Package Content : 1 x 3D Printer Controller.

Features & Highlights

  • Fully assembledandtested
  • Stable performance
  • 3D Printer controller board
  • Ramps 1.4 for Reprap Mendel Prusa

Additional Information

Manufacturer:SainStore Inc.
Brand:SainSmart
Model:101-91-100
Part Number:101-91-100
Publisher:SainStore Inc.
Studio:SainStore Inc.
MPN:101-91-100
EAN:6955170832255
Item Weight:0.11 pounds
Item Size:3.9 x 1.56 x 1.56 inches
Package Weight:0.15 pounds
Package Size:4 x 1.7 x 1.7 inches

SainSmart 3D Printer controller 3D Printer Control Board Ramps 1.4 for Reprap Mendel Prusa Arduino Mega2560 Mega1280 by SainSmart

Buy Now:
SainSmart 3D Printer controller 3D Printer Control Board Ramps 1.4 for Reprap Mendel Prusa Arduino Mega2560 Mega1280

Brand: SainSmart
4.9 out of 5 stars with 40 reviews
Condition: New
Lead Time: 1 - 2 Business Days
Availability: In Stock
$17.99


Quantity:  

 


 


Have questions about this item, or would like to inquire about a custom or bulk order?


If you have any questions about this product by SainSmart, contact us by completing and submitting the form below. If you are looking for a specif part number, please include it with your message.

First Name:
Last Last:
Email Address:
Your Message:

Related Best Sellers


BIQU KFB3.0 3D Control Board +LCD 12864 Module Display Monitor Motherboard + DRV8825 Stepstick Stepper Motor Driver Module for Reparp Mendel Prusa I3 Kossel 3D Printer
By BIQU
ean: 0711176310472,
Specification: KFB3.0 Size: 10mm*10mm Power Input: 12V ~ 40V Support for Motor Drive Type: A4988, DRV8825, TMC2100 Support Control Screen: LCD2004, LCD12864. LCD1602, touch color screen Compile Environment: Arduino IDE firmware: Marlin Net Weight: 10...

ZONESTAR ZRIB Controller Board Motherboard Mainboard Adopt ATMEGA 2560 MCU Compatible for RAMPS 1.4 RepRap Mendel i3 FDM 3D Printer DIY Self Assembly Parts
By ZONESTAR
mpn: EYN6928675770737AI, ean: 0602720186912,
ZONESTAR ZRIB control board is the combination of MEGA2560 plus RAMPS1.4 and A4982 in 3D printer. It is a feature rich all-in-one electronics solution for RepRap and other CNC devices. It features an on-board ATmega2560. Its five motor outputs are po...

ANET 12864 LCD Smart Display Screen Controller Module with 2Pcs 5Pin Flexible Flat Ribbon Cable for ANET A6 A2 E10 E12 Reprap Mendel I3 3D Printer Kit Accessory Part
By Anet
mpn: Anet-0001,
Description: High-quality 3D printer accessories 12864 display and gray cable, brand direct sales, original boutique! Environmental protection, safety, harmless High - quality raw materials, fine workmanship; Strict quality control system, quality ...

OSOYOO 12864 LCD Graphic Smart Display Controller module with connector adapter & cable for RepRap RAMPS 1.4 3D Printer kit Arduino Mega 2560 R3 Shield
By Shenzhen vership Co. LTD
mpn: DKHK100100, ean: 0700686899713,

BIQU Mega2560 Control Board + LCD 2004 Graphic Smart Display Controller Module + Ramps 1.6 Mega Shield+A4988 Stepstick Stepper Motor Driver with Heat Sink for 3D Printer Arduino Reprap
By BIQU
mpn: BIQU-ZZB000164+ZZB00069+K203+L102, ean: 0711176310403,
Specification: 2004LCD: >Using a large screen 2004LCD(3.2'), it can support 8 GB >With a SD card base on back, put slicing file into the SD card and select the file on the LCD, then can be printing >Product comes encoder parameter adjustment can be a...

SMAKN® 3D Printer Reprap Ramps 1.4 2004 LCD Smart Controller Dispaly Adapter
By SMAKN
mpn: EVB769, ean: 0709127325095,
*The intelligent controller includes an SD card reader- rotary encoders and a 20-character x 4 line LCD display. You can easily connect it to your RAMPS 1.4 board using "smart adapter" included. *This panel connect your RAMPS 1.4- you do not need y...

KINGPRINT TFT35 v1.1 Control Panel 3.5-inch Full-Color Touch-Screen LCD Compatible With 3D Printer MKS TFT Control Board
By KINGPRINT
mpn: KINGPRINT-3D0441A004, ean: 0603894528911,
The boot logo and all buttons can design their own interfaces. Increase the custom function button. Support full English interface. Package Included: 1* TFT35 v1.1 touch screen 1 * cable3.5 inch color touch screen, Provide continuous software upgrad...

Gowoops CNC Shield V3 Expansion Board + 4PCS DRV8825 Step Motor Driver with Heatsinks for Arduino 3D Printer
By Gowoops
mpn: ZZAD200200, ean: 0705586405187,
Arduino CNC Shield V3.0 Installation Guide: http://osoyoo.com/?p=4783 CNC Shield Board: GRBL 0.9 compatible. (Open source firmware that runs on an Arduino UNO that turns G-code commands into stepper signals) PWM Spindle and direction pins 4-Axis supp...

Aibecy 2004 LCD Smart Display Screen Controller Module with Cable for RAMPS 1.4 Arduino Mega Pololu Shield Arduino Reprap 3D Printer Kit Accessory
By Aibecy
mpn: LAH7466558694027FR, ean: 0738920349243,
Features: 2004 LCD smart controller for 3D printer. Supports for RAMPS 1.4 control board. Built-in encoding function allows you adjusting the parameter and selecting file to print. 3in screen, clear white characters with blue backlit, displays 4 line...

BIQU KFB3.0 3D Control Board +LCD 12864 Module Display Monitor Motherboard + A4988 Stepstick Stepper Motor Driver Module for Reparp Mendel Prusa I3 Kossel 3D Printer
By BIQU
mpn: 43237-2, ean: 0711176310465,
Specification: KFB3.0 Size: 10mm*10mm Power Input: 12V ~ 40V Support for Motor Drive Type: A4988, DRV8825, TMC2100 Support Control Screen: LCD2004, LCD12864. LCD1602, touch color screen Compile Environment: Arduino IDE firmware: Marlin Net Weight: 10...



Privacy Policy / Terms of Service
© 2019 - metalbot.org. All Rights Reserved.