UKCOCO 5pcs Stepstick 4-Layer DRV8825 Stepper Motor Driver Module with Heat Sink for 3D Printer Reprap RP A4988
UKCOCO 5pcs Stepstick 4-Layer DRV8825 Stepper Motor Driver Module with Heat Sink for 3D Printer Reprap RP A4988 by UKCOCO at 3D Printing Supplies Outlet. MPN: C77JDX23H1GAZ7T2711H. Hurry! Limited time offer. Offer valid only while supplies last. DescriptionThis DRV8825 Stepper Motor Driver Module is upgrade of A4988, simple step and direction control interface, 4-layer, 2 oz copper PCB for
Have questions about this item, or would like to inquire about a custom or bulk order?
If you have any questions about this product by UKCOCO, contact us by completing and submitting the form below. If you are looking for a specif part number, please include it with your message.
Related Best Sellers
mpn: DX3CGV002511BKPB303O, ean: 0191599822163,
DescriptionA4988 is a complete microstepping motor driver with built-in translator for easy operation. This product is available in full, half, 1/4, 1/8 and 1/16 step modes operate bipolar stepper motors, output drive capacity of up to 35 V and 2 A....
mpn: Q-1702001- LCD,
Specifications: Model: 2004 LCD Screen Controller Screen Size: around 3in Item Weight: 129g Package Size: 180* 100 * 30mm Package Weight: 140 Package List: 1 * 2004 LCD Screen 1 * CableSupport For RAMPS 1.4 Control Board.. Original 2004 LCD Smart ...
12864 LCD Screen Specification: Brand: Anet Model: 12864 LCD display control panel Screen size: around 3.2inch weight: 140g Cable: 5pin flat cable Works for anet A6, E10, E12 etc DIY 3d printer kit. Cable Specification: LCD Screen gray cable ...
Description: 1. Supports up to 5 motor drivers with the standard A4988 / DRV8825 Pololu interface. 2. Simple and convenient Connection, larger power than Ramps 1.5/1.4, Better Heat Dissipation with heat sink 3.The features of multiple extended interf...
Description: The TL-Smoother is an addon module for 3D printer stepper motor drivers.The board provides flyback diodes(freewheeling diodes) for the motor outputs,so that they are also protected against induction voltages in the unpowered state of the...
mpn: S109, ean: 0713012558451,
The S109 driver is based on theTB67S109 stepper motor driver chip design.It employs four layers of thick copper precipitation PCB with automatic patch processing. This driver uses the indexer (DIR / STEP) control interface.It can drive the 57 stepper...
mpn: LV8729, ean: 0713012558659,
Model: LV8729Type: stepper motor driverSize: 1.5mm x 2.0mmMaximum drive current: 1.8AMaximum voltage: 36V (usually 12V)Supported segament: 1, 1/2, 1/4, 1/8, 1/16, 1/32, 1/64, 1/128Product craft: four-layer PCB boardProduct weight: 5gDriver current al...
mpn: TMC2130 v1.0, ean: 0713012558390,
Model: TMC2130 v1.0Interface: Step/DirConfiguration: CFG PinsNative Microsteps*: Up to 1/256MicroPlyer Microsteps: 1/256Logic Voltage VIO: 3-5VMotor Voltage VM: 5.5-46VMotor Phase Current: 1.2A RMS, 2.5A PeakVM always needed**: YesInternal V- Regulat...
mpn: TMC2100 V1.3, ean: 0713012558598,
Use of the TMC2100 drive module:1. When use in the Ramps1.4 or MKS Gen, or Lerdge touch screen motherboard, please remove the 3 jumper cap under the socket.2. Please pay attention to direction.3. The heat sink directly attached to the PCB.4. The moto...
mpn: TMC2208, ean: 0713012558420,
Flexible microPlyer interpolation unit, the component can provide up to 256 microstep / step resolution, even in the pulse rate is limited system can still be perfect to achieve sinusoidal control; Both components have pulse / direction input, can be...