WillBest 12pcs M4 Threaded Steel Ball Rod Ends for Kossel 3D Printer Magnetic Joints
Blowout Sale! Save 51% on the WillBest 12pcs M4 Threaded Steel Ball Rod Ends for Kossel 3D Printer Magnetic Joints by WillBest at 3D Printing Supplies Outlet. MPN: P5-T6-WS127. Hurry! Limited time offer. Offer valid only while supplies last. 12pcs M4 Threaded Steel Ball Rod Ends For Kossel 3D Printer Magnetic
Have questions about this item, or would like to inquire about a custom or bulk order?
If you have any questions about this product by WillBest, contact us by completing and submitting the form below. If you are looking for a specif part number, please include it with your message.
Related Best Sellers
mpn: P5-T6-WS279, ean: 7022862232903,
2pcs Prusa i3 MK2/MK2S/MK3 3d printer X/Z axis Trapezoidal nut lead Screw Nuts For Reprap Prusa i3 MK3 3D printer parts...
mpn: K17-Printer, ean: 6932083803015,
Product Specs: (1) Mega 2560 R3 (2) 3D Printer Controller RAMPS 1.4 It is designed to fit the entire electronics needed for a RepRap in one small package for low cost. RAMPS interfaces an Arduino-compatible Mega with the powerful Arduino-compatibl...
mpn: P5-T6-WS527, ean: 7022862235386,
1pcs extruder NEMA17 stepper Motor For Creality CR-10/CR-10S 3D Printer X/Y Axis...
mpn: TE946, ean: 4894623935629,
Features: Hardware compatible with StepStick and Pololu A4988 Drive capability up to 1.2A (RMS) continuous coil current - 2A Peak Step/Dir interface with microstep interpolation (up to 256 microsteps) Configuration via CFG pins or UART interface Moto...
mpn: YJJ0720zh-5E8B32FD42, ean: 6954231638508,
Description: Product Name: Printer Platform Sticker Size: 300 * 300mm Weight: 80g Applicable temperature: 80 - 100 degrees Celsius Model: 300*300 stickers Package includes: 1 x Printer Platform Sticker Features: --High Quality --Professional Design ...
mpn: YJJ0720zh-D7A54D405E, ean: 6954231638676,
Description: Product Name: Driver Board For: Printer Weight: 27g Applicable model: 4988 Model: TMC2100 Type: Other IC Size: 2*1.5*1cm Material: PCB Package includes: 1 x Driver Board + 1 x Cooling Fin + 1 x Screw Driver Features: --High Quality --Pr...
mpn: BIQU-ZZB000150, ean: 0722970433571,
Specification : Interface: Step/Dir Configuration: CFG Pins or UART Microplyer/ Microsteps:up to 1/256 Logic Voltage VIO: 3-5V Motor Voltage VM: 5.5V-36V Motor Phase Current: 1.2A RMS,2.0A Peak VM always needed: Yes Internal V-Regulator: enable...
Features: If you intend to use heated bed with your 3D printer that uses a 12V power supply, then this module is recommended, else it may cause excessive current during times which may burn the connectors on the controller board. If you need anythin...
mpn: Sticker 8.4"x 8.4" T-Black, ean: 0711102059925,
Feature Sticker Size: 214mm x 214mm (8.4 x 8.4 inch);Thickness: 0.8 mm Weight:0.08kg(0.18lb); Short-term Temperature Support: 120°C ~149°C/ 248°F~300.2°F; Long-term Temperature Support : 90°C ~ 93°C/ 194°F~199.42°F; Comes with a usable washab...
mpn: 2 Snow Mos, ean: 0711102059840,
What is Mosfet Module? 1. If you intend to use heated bed with your 3D printer that uses a 12V power supply, then this module is recommended, else it may cause excessive current during times which may burn the connectors on the controller board. 2. A...