WillBest 1pcs extruder NEMA17 Stepper Motor for Creality CR-10/CR-10S 3D Printer X/Y Axis
Blowout Sale! Save 51% on the WillBest 1pcs extruder NEMA17 Stepper Motor for Creality CR-10/CR-10S 3D Printer X/Y Axis by WillBest at 3D Printing Supplies Outlet. MPN: P5-T6-WS527. Hurry! Limited time offer. Offer valid only while supplies last. 1pcs extruder NEMA17 stepper Motor For Creality CR-10/CR-10S 3D Printer X/Y
Have questions about this item, or would like to inquire about a custom or bulk order?
If you have any questions about this product by WillBest, contact us by completing and submitting the form below. If you are looking for a specif part number, please include it with your message.
Related Best Sellers
mpn: TE946, ean: 4894623935629,
Features: Hardware compatible with StepStick and Pololu A4988 Drive capability up to 1.2A (RMS) continuous coil current - 2A Peak Step/Dir interface with microstep interpolation (up to 256 microsteps) Configuration via CFG pins or UART interface Moto...
mpn: YJJ0720zh-5E8B32FD42, ean: 6954231638508,
Description: Product Name: Printer Platform Sticker Size: 300 * 300mm Weight: 80g Applicable temperature: 80 - 100 degrees Celsius Model: 300*300 stickers Package includes: 1 x Printer Platform Sticker Features: --High Quality --Professional Design ...
mpn: YJJ0720zh-D7A54D405E, ean: 6954231638676,
Description: Product Name: Driver Board For: Printer Weight: 27g Applicable model: 4988 Model: TMC2100 Type: Other IC Size: 2*1.5*1cm Material: PCB Package includes: 1 x Driver Board + 1 x Cooling Fin + 1 x Screw Driver Features: --High Quality --Pr...
mpn: BIQU-ZZB000150, ean: 0722970433571,
Specification : Interface: Step/Dir Configuration: CFG Pins or UART Microplyer/ Microsteps:up to 1/256 Logic Voltage VIO: 3-5V Motor Voltage VM: 5.5V-36V Motor Phase Current: 1.2A RMS,2.0A Peak VM always needed: Yes Internal V-Regulator: enable...
Features: If you intend to use heated bed with your 3D printer that uses a 12V power supply, then this module is recommended, else it may cause excessive current during times which may burn the connectors on the controller board. If you need anythin...
mpn: Sticker 8.4"x 8.4" T-Black, ean: 0711102059925,
Feature Sticker Size: 214mm x 214mm (8.4 x 8.4 inch);Thickness: 0.8 mm Weight:0.08kg(0.18lb); Short-term Temperature Support: 120°C ~149°C/ 248°F~300.2°F; Long-term Temperature Support : 90°C ~ 93°C/ 194°F~199.42°F; Comes with a usable washab...
mpn: 2 Snow Mos, ean: 0711102059840,
What is Mosfet Module? 1. If you intend to use heated bed with your 3D printer that uses a 12V power supply, then this module is recommended, else it may cause excessive current during times which may burn the connectors on the controller board. 2. A...
mpn: Hilitandiqyt9ha74g, ean: 0763741052379,
Features: Use removable A4988 or DRV8825 compatible stepping driver. The extension board can be used for engraving machine or 3D printer driver. Compatible with GRBL 0.8. Open-source firmware operated on UNO, converting G code command into stepping s...
mpn: 164946, ean: 0725370727875,
Features: 1. 1.2A two-phase stepper motor single-phase current (peak 2.5A); adjustable motor operating current; 2. Support two control methods: Step / DIR interface and SPI interface control 3. Motor input voltage range: 4.75 ~ 46V 4. Logical interfa...
mpn: ZZDBAD2002, ean: 0705586404937,
Arduino CNC Shield V3.0 Installation Guide: http://osoyoo.com/?p=4783 CNC Shield Board: (Learn more information pls go to ASIN: B0157ZZ28M) GRBL 0.9 compatible. (Open source firmware that runs on an Arduino UNO that turns G-code commands into stepper...