Login       My Wishlist
  My Cart
$0.00 / 0 items
 
3D Printing Supplies Outlet
3D Printers & Essential Supplies
 
International Access
Global Shipping Options Available
  Our Catalog   3D Printer Parts & Accessories   3D Printer Interface & Driver Modules

XCSOURCE 3D Printer TMC2208 V1.0 Mute Stepper Driver + Tester Module Board + Stackable Headers Kit + USB Cable + Heat Sink + Screwdriver TE946


XCSOURCE 3D Printer TMC2208 V1.0 Mute Stepper Driver + Tester Module Board + Stackable Headers Kit + USB Cable + Heat Sink + Screwdriver TE946 by XCSOURCE at 3D Printing Supplies Outlet. MPN: TE946. Hurry! Limited time offer. Offer valid only while supplies last. Features: Hardware compatible with StepStick and Pololu A4988 Drive capability up to 1.2A (RMS) continuous coil current - 2A Peak Step/Dir interface


Product Description

Features:
Hardware compatible with StepStick and Pololu A4988
Drive capability up to 1.2A (RMS) continuous coil current - 2A Peak
Step/Dir interface with microstep interpolation (up to 256 microsteps)
Configuration via CFG pins or UART interface
Motor supply voltage: 5.5...36V
Logic supply voltage: 3.3...5V
Components on the bottom for better heat dissipation
StealthChop2 for quiet operation and smooth motion (default setting)
SpreadCycle, highly dynamic motor control chopper (enableable via UART)

To run the program:
1. Install ScriptCommunicator
2. Download TMC2208.scez
3. Start the TMC2208.scez file with the ScriptCommunicator: ScriptCommunicator TMC2208.scez
4. Choose the right serial port and click Connect
5. Modifications in the Configurator are directly transmitted

Notes:
The OTP bits can be programmed only one time.
If you enable spreadCycle then TOFF cannot be 0(null)

Package Includes:
1 x TMC2208 Stepper Driver
1 x?Tester Module
1 x USB Cable
1 x Screwdriver
1 x Large Heat Sink

Features & Highlights

  • Hardware compatible with StepStick and Pololu A4988
  • Drive capability up to 1.2A (RMS) continuous coil current - 2A Peak
  • Step/Dir interface with microstep interpolation (up to 256 microsteps)
  • Configuration via CFG pins or UART interface
  • Components on the bottom for better heat dissipation

Additional Information

Manufacturer:XCSOURCE
Brand:XCSOURCE
Model:TE946
Part Number:TE946
Publisher:XCSOURCE
Studio:XCSOURCE
MPN:TE946
EAN:4894623935629
Item Weight:0.07 pounds

XCSOURCE 3D Printer TMC2208 V1.0 Mute Stepper Driver + Tester Module Board + Stackable Headers Kit + USB Cable + Heat Sink + Screwdriver TE946 by XCSOURCE

Buy Now:
XCSOURCE 3D Printer TMC2208 V1.0 Mute Stepper Driver + Tester Module Board + Stackable Headers Kit + USB Cable + Heat Sink + Screwdriver TE946

Brand: XCSOURCE
Condition: New
Lead Time: 1 - 2 Business Days
Availability: In Stock
$16.99


Quantity:  

 


 


Have questions about this item, or would like to inquire about a custom or bulk order?


If you have any questions about this product by XCSOURCE, contact us by completing and submitting the form below. If you are looking for a specif part number, please include it with your message.

First Name:
Last Last:
Email Address:
Your Message:

Related Best Sellers


By Ocamo
mpn: YJJ0720zh-5E8B32FD42, ean: 6954231638508,
Description: Product Name: Printer Platform Sticker Size: 300 * 300mm Weight: 80g Applicable temperature: 80 - 100 degrees Celsius Model: 300*300 stickers Package includes: 1 x Printer Platform Sticker Features: --High Quality --Professional Design ...

By Ocamo
mpn: YJJ0720zh-D7A54D405E, ean: 6954231638676,
Description: Product Name: Driver Board For: Printer Weight: 27g Applicable model: 4988 Model: TMC2100 Type: Other IC Size: 2*1.5*1cm Material: PCB Package includes: 1 x Driver Board + 1 x Cooling Fin + 1 x Screw Driver Features: --High Quality --Pr...

By BIQU
mpn: BIQU-ZZB000150, ean: 0722970433571,
Specification : Interface: Step/Dir Configuration: CFG Pins or UART Microplyer/ Microsteps:up to 1/256 Logic Voltage VIO: 3-5V Motor Voltage VM: 5.5V-36V Motor Phase Current: 1.2A RMS,2.0A Peak VM always needed: Yes Internal V-Regulator: enable...

By Quimat
mpn: QY08-2N,
Features: If you intend to use heated bed with your 3D printer that uses a 12V power supply, then this module is recommended, else it may cause excessive current during times which may burn the connectors on the controller board. If you need anythin...

By FYSETC
mpn: Sticker 8.4"x 8.4" T-Black, ean: 0711102059925,
Feature Sticker Size: 214mm x 214mm (8.4 x 8.4 inch);Thickness: 0.8 mm Weight:0.08kg(0.18lb); Short-term Temperature Support: 120°C ~149°C/ 248°F~300.2°F; Long-term Temperature Support : 90°C ~ 93°C/ 194°F~199.42°F; Comes with a usable washab...

By FYSETC
mpn: 2 Snow Mos, ean: 0711102059840,
What is Mosfet Module? 1. If you intend to use heated bed with your 3D printer that uses a 12V power supply, then this module is recommended, else it may cause excessive current during times which may burn the connectors on the controller board. 2. A...

By Hilitand
mpn: Hilitandiqyt9ha74g, ean: 0763741052379,
Features: Use removable A4988 or DRV8825 compatible stepping driver. The extension board can be used for engraving machine or 3D printer driver. Compatible with GRBL 0.8. Open-source firmware operated on UNO, converting G code command into stepping s...

By Alloet
mpn: 164946, ean: 0725370727875,
Features: 1. 1.2A two-phase stepper motor single-phase current (peak 2.5A); adjustable motor operating current; 2. Support two control methods: Step / DIR interface and SPI interface control 3. Motor input voltage range: 4.75 ~ 46V 4. Logical interfa...

By Gowoops
mpn: ZZDBAD2002, ean: 0705586404937,
Arduino CNC Shield V3.0 Installation Guide: http://osoyoo.com/?p=4783 CNC Shield Board: (Learn more information pls go to ASIN: B0157ZZ28M) GRBL 0.9 compatible. (Open source firmware that runs on an Arduino UNO that turns G-code commands into stepper...

By BALITENSEN
mpn: YDP25, ean: 0786391186652,
The DRV8825 stepper motor driver carrier is a breakout board for TI's DRV8825 microstepping bipolar stepper motor driver. The module has a pinout and interface that are nearly identical to those of our A4988 stepper motor driver board, so it can be ...



Privacy Policy / Terms of Service
© 2018 - metalbot.org. All Rights Reserved.