YOTINO Pei Sheet 12" x 12" with 3M 468MP Adhesive Tape Pre-Applied, Ultem 1000, Ultem Sheet,0.02''/0.5mm Thick 3D Printer Build Surface for Prusa, CR-10, CR-10S S3, Tevo Tornado, Mendela, AO Series
YOTINO Pei Sheet 12'' x 12'' with 3M 468MP Adhesive Tape Pre-Applied, Ultem 1000, Ultem Sheet,0.02''/0.5mm Thick 3D Printer Build Surface for Prusa, CR-10, CR-10S S3, Tevo Tornado, Mendela, AO Series by YOTINO at 3D Printing Supplies Outlet. MPN: YPN0039-USA. Hurry! Limited time offer. Offer valid only while supplies last. YOTINO 12'' x 12'' PEI Sheet, Ultem Sheet, Adhesive Transfer Tape Sheets, 3D Printer Build Surface What is PEI (Polyethermide) 1.High strength and
What is PEI (Polyethermide)
1.High strength and heat resistance (up to 340° F) allows the polymer to perform consistently in high temperature environments. When used in a 3D printing application, PEI is excellent because it can withstand the numerous heat cycles that a 3D print bed goes through from print to print
2.Polyetherimide has a natural Amber(yellow-orange) color and comes in different grades. Ultem 1000 is the standard, unfilled grade. It is inherently flame resistant and low in smoke production
3. PEI (Polyetherimide) sheets provide a 3D printing build surface that requires no tape, slurry, or adhesive. ABS and PLA both stick extremely well to the surface, which eliminates the need for support rafts used for better adhesion. The printed 3D parts will adhere to the PEI surface on a heated bed, and it will release or pop off when cooling down
Features:1. PEI sheet is 3M tape pre-applied, which means you have no need to apply the 3M tape on the sheet anymore, and no man-made air bubble.
2. Easily clear the Ultem sheet surface with a quick wide done with isopropyl alcohol, methyl alcohol, or soap for next use.
3.You will be amazed at how well this sheet works for PLA and ABS filament adhesion if you buy the PEI sheet.
Material: PEI (Polyetherimide)
1 x 12*12 PEI Sheet with 3M tape pre-applied
Features & Highlights
- [Material] -- 100% PEI, Ultem1000, resistant to Acetone, amber color
- [Pre-applied Tape] -- PEI sheet comes with pre-applied 3M 468Mp tape, the surface will not produce any man-made air bubble, saving the effort of applying the adhesive tape
- [Durable and Reusable] -- Little Cleanup after multiple prints, Adhesive transfer tape sheets is easy to wash with water and soap or use alcohol for quick cleaning in between prints
- [ABS and PLA Filaments] -- ABS and PLA filaments (along with many other materials) print directly on to PEI surface without the need for additional adhesives, tapes, or slurry
- [Easy to Cut] -- You can cut the Ultem sheet down to your desired size, in which case strips may work better or using the strips because it may be easier to apply as opposed to one huge sheet
|Item Weight:||0.12 pounds|
|Item Size:||11.81 x 0.04 x 0.04 inches|
|Package Weight:||0.12 pounds|
|Package Size:||11.81 x 0.04 x 0.04 inches|