3D Printer Parts & Accessories - 4 - Page 3 - Super Savings! Save up to 31%

mpn: Anet-0008,

Overview: 1. 3d printer waterproof anti-jamming DC three-wire npn often open square inductive metal sensor proximity switch sensor 10-30v. 2. This is an auto level sensor for the Anet A8 or other Prusa i3 Models. 3. Easy installation, just unplug the...

mpn: 50IGRFWL2611N, ean: 0192684015521,

4pcs 3D Printer Fan 12V 0.08A DC Mini Quiet Cooling Fan 40X40X10mm with 28cm Cable for 3D Printer, DVR,and Other Small Appliances Series Repair ReplacementDescription:Size: 40 mm x 40 mm x 10 mm;Working Voltage: DC 12V;Working Current: 0.08A;Air Flow...

You Save: 31%

mpn: FEHE030, ean: 0707137815445,

Flexible Blade Size: Small 1.96 * 0.9 in ; Long 4.52 * 0.59 in Very thin blade, Work well Suitable size, More Flexible This 3D print removal tool can help you easy get the prints off from the print bed A necessary tool set in your 3D printer tool kit...

You Save: 15%

mpn: NTC3950_CWM, ean: 0719104609551,

Our thermistor can replace stock thermistor in Duplicator i3 / Maker Select V1, V2, V2.1 and Plus 3D Printers. Thermistor assembled with 600C rated ceramic glue and fiberglass insulation wires. Wiring insulation can withstand much higher heat than st...

mpn: POT016, ean: 0605175684569,

Note: Two kinds of bottles with same 500g resin will be send randomly.Parameter information:Size: ~500g/500mlColor: GreyMain material: resin monomer, photo initiatorExposure parameters: Bottom exposure time(s) 20-60s, normal exposure time(s) 5-15sWar...

mpn: HIC0929AK,

Pls kindly scan the QR code of image, you will get the assembly manaul of this part, thank you. Package: *Mounting screws*Aluminum MK8 'Extruder' frame, with bored intake hole.*Bushing*Spring*Brass 'extruder' drive gear*35 mm long teflon intake guide...

mpn: HY-BLUE-TAPE-6x6, ean: 0887503180787,

Gizmo Dorks blue painter's tape is the go-to and cost effective way of covering your 3D printer bed plate. Plastic filament such as ABS or PLA stick well to this tape while also being forgiving enough to let go when your print is finished. The tape i...

mpn: 3D Printer ACC - 01, ean: 0613852614983,

DOBSTFY Brand 3D Printer platform can be suitable for temperature from 80 to 100 Celcius. Build sheet adheres to a print bed to help the filament stick during printing, it is easy to take off the models. Compatible with most Cartesian style 3D print...

You Save: 13%

mpn: CC-COTTON-15, ean: 0724190093214,

Specification Material: cotton Cotton Size: 70mm x 20mm x 2mm Kapton:Width 6mm, Lenght:33M Feature: heat preservation Note: this product only suitable for 3D printer using indoors Attention: Small parts, keep away from children Package inclu...

mpn: M2558-04, ean: 7432114196172,

This is Micro Swiss MK10 All Metal Hotend ONLY style nozzle, it will ONLY fit our MK10 All Metal Hotend Kit. This nozzle has completely different internal dimensions to work with our Micro Swiss thermal barrier tube. It is made from a A2 Steel, heat ...

mpn: BIQU-3D0148, ean: 0608408773610,

Descriptions:Product Name: MK10 nozzle Material: high quality stainless steel Color: copper color Size: 13mm * 9mm Nozzle Accuracy: 0.4mm Screw outer diameter: 7mmPackage Included: 5*MK10 NozzleStandard 0.4 mm nozzle hole diameter. Highly recommended...

mpn: M2570, ean: 7432114696696,

This is a replacement lever and extruder plate for Wanhao i3 and all of its clones. Lever and plate are CNC machined from 6061 billet aluminum, with weight reduction features. It will replace a stock plastic assembly that has tendency to warp over ti...

mpn: BLKMK10M3_2, ean: 0719104610250,

This MK10 heater block version is for extruder with thermistor only, it has M3x0.5 tapped hole to accept M3 clamping screw with washer.If you are looking for FlashForge version of MK10 block with M4x0.7 tapped hole - please check ASIN B078JDHD4M Plea...

You Save: 15%

mpn: MH5878263117250560,

The v6 HotEnd Full Kit from E3D has been redesigned for your convenience from the ground up! This new hot end contains the same signature high temperature performance for high-temp printing, as well as increased functionality for printing soft and fl...

mpn: IC015, ean: 0192187277952,

AIKEER Accessories Series Designed and Manufactured by AIKEER Only Specification of PTFE Teflon Tube Material: PTFE (Poly Tetra Fluoro Ethylene)，Density: 2.15-2.20g/cm3 Heat resistance, up to 260℃ Outside Diameter: 4mm, Inside Diameter: 2mm Colo...

mpn: BT65X65-3PK, ean: 0099461338722,

The Buildtak 3D-printing build surface is a 6.5" x 6.5" square sheet that adheres to a print bed of a fused-filament 3D printer (sold separately) to help the filament stick during printing, while also enabling clean removal of the printed part afterw...

mpn: GD-POLYPEI-3M-10x10, ean: 0887503180831,

PEI (Polyetherimide) sheets provide a 3D printing build surface that requires no tape, slurry, or adhesive. ABS and PLA both stick extremely well to the surface, which eliminates the need for support rafts used for better adhesion. The printed 3D par...

mpn: GD-POLYPEI-3M-8x8, ean: 0887503180824,

PEI (Polyetherimide) sheets provide a 3D printing build surface that requires no tape, slurry, or adhesive. ABS and PLA both stick extremely well to the surface, which eliminates the need for support rafts used for better adhesion. The printed 3D par...

mpn: M2559-04, ean: 0866086000200,

This is an all metal hotend upgrade kit for MK10 Extruders. All metal hotend will let you print at much higher temperature than possible with original PTFE lined one. Another benefit of an all metal hotend design is more consistent melt chamber contr...

You Save: 21%

mpn: Hestya-Extruder Nozzle-02, ean: 0711347867262,

Features: Characteristic: The shape is smooth and glossy with lettering, the chamfer is rounded, which can reduce the resistance of the corners, and avoid blocking of the filament, and the contact surface is smooth, which can effectively prevent pri...